þÿ                  MOBOTIX FIRMWARE-UPDATE NOTES

                  =============================





* General Information



  Date:           2009-12-08



  Release:        MX-V3.5.2.23



  For Hardware:   MOBOTIX Network Cameras

                  M12-Models (D12, V12, ...)

                  M22-Models (D22, Q22)



  Manufacturer:   MOBOTIX AG

                  Kaiserstrasse

                  67722 Langmeil

                  GERMANY

                  http://www.mobotix.com/





* General Notes



This is an improved customer version for MOBOTIX cameras with software

MX-V3.4.x or higher.



No warranty for any function.



No warranty for compatibility to former or future versions.



USE ONLY AT YOUR OWN RISK!





The software can be used on all M12, D12, V12, M22, D22 und Q22 cameras

and software version MX-V3.4.x or higher.



This update will NOT work on older cameras.



News about this software release can be found under this address:



   http://www.mobotix.com/







* Updating the Camera Software



 1. Download the file MX_system_de_3_5223.mpl to your computer.



 2. Make sure that the file has been transferred completely. The table at the

    end contains the file size and MD5 checksum for the download file.



 3. Make sure that the camera fulfills the requirements listed above. Check

    the information under "Admin Menu > Hardware and Release Information" on the

    camera.



 4. Make sure that you are connected directly to the camera, without any proxy

    server in-between. Disable any proxy servers. Microsoft Internet Explorer:

    "Tools > Internet Options > Connections (tab) > Settings (in LAN Settings) >

    Proxy Server".



 5. Restart the camera.



 6. Log onto the camera as administrator, open "Admin Menu > Upload system

    Software" and read the Important Notes. Select the file

    MX_system_de_3_5223.mpl and start the upload.



    CAUTION:

       - Never disrupt the procedure while the camera is uploading or

         rewriting its flash memory. If this has happened anyhow, the camera

         will automatically boot the backup system (the title bar in the browser

         interface is red). The backup system only allows updating the system

         software.



       - The upload procedure may take several minutes, and up to 30 minutes

         when using an ISDN connection.



       - The camera LEDs will show a specific pattern while uploading.

         Please read the manual for the meaning.



       - During the procedure, the browser windows may not be updated

         properly.



 7. Upon completion of the upload, the camera will display a message. Read

    this message carefully.



 8. If the upload has finished successfully, restart the camera. If the upload

    was not successful, do not reboot the camera. Restart the upload process and

    wait until the upload has finished successfully.



    If the camera detects a faulty operating system, it will boot its backup

    operating system (the title bar in the browser interface is red); in this

    case, you should update the system software again.



 9. The settings of the camera will remain intact during and after the update.

    It is recommended, however, to reset certain parts of the configuration to

    the factory defaults, while keeping the other parts of the current

    configuration. If conflicts are detected while opening camera pages, warning

    messages will inform you about these conflicts.



    When resetting the configuration to factory defaults, the network, audio,

    and security settings should not be reset to factory defaults as this may

    render the camera unreachable.







* Files-Overview



    Bytes md5sum                            Name

--------------------------------------------------------------------------

 11532707 2738e932491aaf27b547687168166e09  MX_system_de_3_5223.mpl

 10758563 a3449e55d0e2cac23f4e7cf17a22301e  MX_system_cn_3_5223.mpl

 11295139 de576085ad095b77ff14f828da4af016  MX_system_fr_3_5223.mpl

 11655587 f40abca74c13d00a5c87c202d4b29a56  MX_system_it_3_5223.mpl

 10967459 16bd54dea39592bfdc94ae9a1cb93ba2  MX_system_jp_3_5223.mpl

 11549091 dbd5b6867b7b0146605f759fe7947bec  MX_system_es_3_5223.mpl

 10488227 25e377718b498b62697187f3e6354d8a  MX_system_ru_3_5223.mpl