þÿ                  MOBOTIX FIRMWARE-UPDATE NOTES

                  =============================





* General Information



  Date:           2009-07-20



  Release:        MX-V3.4.5.18



  For Hardware:   MOBOTIX Network Cameras

                  M12-Models (D12, V12, ...)

                  M22-Models (D22, Q22)



  Manufacturer:   MOBOTIX AG

                  Kaiserstrasse

                  67722 Langmeil

                  GERMANY

                  http://www.mobotix.com/







* General Notes



This is an improved customer version for MOBOTIX cameras with software

MX-V3.0.3.17 or higher.



No warranty for any function.



No warranty for compatibility to former or future versions.



USE ONLY AT YOUR OWN RISK!





The software can be used on all D12, M12, D22 and M22 cameras with at least

128 MB RAM and software version MX-V3.0.3.17 or higher.



This update will NOT work on M1 or M10 cameras.



News about this software release can be found under this address:



   http://www.mobotix.com/







* Updating the Camera Software



 1. Download the file MX_system_ru_3_4518.mpl or the file MX_system_ru_3_4518.zip

    to your computer. If you downloaded the zip file, unzip it.



 2. Make sure that the file has been transferred completely. The table at the

    end contains the file size and checksums for the download files.



 3. Make sure that the camera fulfills the requirements listed above. Check

    the information under "Admin Menu > Hardware and Release Information" on the

    camera.



 4. Make sure that you are connected directly to the camera, without any proxy

    server in-between. Disable any proxy servers. Microsoft Internet Explorer:

    "Tools > Internet Options > Connections (tab) > Settings (in LAN Settings) >

    Proxy Server".



 5. Restart the camera.



 6. Log onto the camera as administrator, open "Admin Menu > Upload system

    Software" and read the Important Notes. Select the file

    MX_system_ru_3_4518.mpl and start the upload.



    CAUTION:

       - Never disrupt the procedure while the camera is uploading or

         rewriting its flash memory. If this has happened anyhow, the camera

         will automatically boot the backup system (the title bar in the browser

         interface is red). The backup system only allows updating the system

         software.



       - The upload procedure may take several minutes, and up to 30 minutes

         when using an ISDN connection.



       - The camera LEDs will show a specific pattern while uploading.

         Please read the manual for the meaning.



       - During the procedure, the browser windows may not be updated

         properly.



 7. Upon completion of the upload, the camera will display a message. Read

    this message carefully.



 8. If the upload has finished successfully, restart the camera. If the upload

    was not successful, do not reboot the camera. Restart the upload process and

    wait until the upload has finished successfully.



    If the camera detects a faulty operating system, it will boot its backup

    operating system (the title bar in the browser interface is red); in this

    case, you should update the system software again.



 9. The settings of the camera will remain intact during and after the update.

    It is recommended, however, to reset certain parts of the configuration to

    the factory defaults, while keeping the other parts of the current

    configuration. If conflicts are detected while opening camera pages, warning

    messages will inform you about these conflicts.



    When resetting the configuration to factory defaults, the network, audio,

    and security settings should not be reset to factory defaults as this may

    render the camera unreachable.







* Files--Overview



    Bytes md5sum                            Name

--------------------------------------------------------------------------

 11130557 f39a776135506bb083c6f217dead91ff  MX_system_de_3_4518.mpl

 10368701 5cc63d3776ab6f4a8dea18aef38d092c  MX_system_cn_3_4518.mpl

 10901181 e3ac26a38fa9f66e23835272ffd4fc04  MX_system_fr_3_4518.mpl

 11265725 e380f452e3fc8df0e45a7940b5e1d558  MX_system_it_3_4518.mpl

 10577597 a6786f60ff42d4f4e651bfc2828b51a9  MX_system_jp_3_4518.mpl

 11159229 00fc413e6a0cefe2e5815b895f89a3a1  MX_system_es_3_4518.mpl

 10102461 3fa4831d77e9764a2687e4c3f47342bf  MX_system_ru_3_4518.mpl