Home / Support / User Forum / Settings - Events / Event Video Motion Windows - Adding Rectangle -FYI

Navigation

Event Video Motion Windows - Adding Rectangle -FYI

Previous topic

Settings - Events

Next topic

You need to be logged in to get access to the forums. You can do so here.

Author	Message
Ken Mr. Posts: 17	Event Video Motion Windows - Adding Rectangle -FYI Sunday, 05 February 2012 5:28:07 pm Just thought I would post this for those of you using a web browser to access your cams. Firefox 7.0.1 - Does not allow adding your VM rectangles.
Matteo Lugaresi Sig. Posts: 303	Re: Sunday, 05 February 2012 10:16:16 pm I would like to add something to your statement: Configuring video motion windows and other events of cameras running software release 4.1.1.7 or higher is only fully supported in the upcoming release of MxControlCenter 2.5.1.
Ken Mr. Posts: 17	VM Tuesday, 07 February 2012 4:13:22 pm Matteo i'm starting to think you work for Mobotix! Nothing against MxC but It's never very impressive when a company takes there products proprietary. & what ever became of the last chapters in the manuals that were never published?? Chapters 10, 11, ( 12 Troubleshooting )
Matteo Lugaresi Sig. Posts: 303	Re: Tuesday, 07 February 2012 8:14:36 pm As far as I know the only proprietary thing Mobotix introduced is the MxPEG codec but you can find a outstanding explanation about the reasons that lead to it in this article by Simon Hall. Concerning the missing chapters you are write, they were supposed to be written a long time ago but perhaps something changed in the schedule of the Technical Support. Fortunately there is a forum like this were people like you and me can share experience and suggestions. Feel free to ask your questions, I'll try my best to answer.
user815 Posts: 67	Chapters 10, 11 Wednesday, 08 February 2012 8:49:01 am These Chapters are published in the _german_ version of the sw manual since 02/01/2008 (four years old!): http://www.mobotix.com/..._ML_Software_de_080201.pdf So what is missing is the english version

Author

Message

Ken
Mr.

Posts: 17

Event Video Motion Windows - Adding Rectangle -FYI

Sunday, 05 February 2012 5:28:07 pm

Just thought I would post this for those of you using a web browser to access your cams.
Firefox 7.0.1 - Does not allow adding your VM rectangles.

Matteo Lugaresi
Sig.

Posts: 303

Re:

Sunday, 05 February 2012 10:16:16 pm

I would like to add something to your statement:

Configuring video motion windows and other events of cameras running software release 4.1.1.7 or higher is only fully supported in the upcoming release of MxControlCenter 2.5.1.

Ken
Mr.

Posts: 17

VM

Tuesday, 07 February 2012 4:13:22 pm

Matteo i'm starting to think you work for Mobotix!

Nothing against MxC but It's never very impressive when a company takes there products proprietary.

& what ever became of the last chapters in the manuals that were never published??
Chapters 10, 11, ( 12 Troubleshooting )

Matteo Lugaresi
Sig.

Posts: 303

Re:

Tuesday, 07 February 2012 8:14:36 pm

As far as I know the only proprietary thing Mobotix introduced is the MxPEG codec but you can find a outstanding explanation about the reasons that lead to it in this article by Simon Hall.

Concerning the missing chapters you are write, they were supposed to be written a long time ago but perhaps something changed in the schedule of the Technical Support. Fortunately there is a forum like this were people like you and me can share experience and suggestions. Feel free to ask your questions, I'll try my best to answer.

user815

Posts: 67