• Consists of in-ceiling mount and mounting parts
• Easy mounting from front
• Installation dimension: ∅ 150 mm

The In-Ceiling set allows mounting the cameras in fake ceilings, for example. This type of installation provides optimum protection for the camera and reduces the visible profile to a minimum since the camera only protrudes 24 mm (1 in) from the ceiling.

Article number:
MX-OPT-IC

• Consists of on-wall mount and mounting parts
• Also conforms to U.S.installation standards
• Reliably protects the cabling and allows integrating additional modules within the on-wall mount
• Dimensions: 165 mm x 37 mm

The On-Wall set can reliably protect external cables if the cables cannot be guided from below the housing but have to be led above the wall. In addition, the On-Wall mount provides ample space for extra modules.

Article number:
MX-OPT-AP

• Consists of on-wall mount and mounting parts
• Also conforms to U.S.installation standards
• Reliably protects the cabling and allows integrating additional modules within the on-wall mount
• Dimensions: 166 mm x 74 mm

The On-Wall set allows the mounting of the camera at a 10° tilt angle. Moreover, it reliably protects external cables if the cables cannot be guided from below the housing but have to be led above the wall. In addition, the On-Wall mount provides ample space for extra modules.

Article number:
MX-OPT-AP-10DEG

• Weatherproof (IP65) wall mount for MOBOTIX dome cameras D22/D24 IT/Sec, Q22/Q24 Sec and ExtIO
• Covers RJ45 wall outlets
• Space for expansion modules (battery, UMTS, WLAN, etc.)
• Easily mounted to poles using pole mount

The Wall Mount is the ideal solution for mounting MOBOTIX dome cameras D22/D24 IT/Sec, Q22/Q24 Sec or ExtIO to walls for indoor and outdoor applications. The camera is absolutely dustproof and resistan against water jets (IP65). The wall mount also covers RJ45 wall outlets and has ample space for additional modules.

Article number:
MX-OPT-WH

• Fastening for Dome wall mount MX-OPT-WH
  (for D22/D24 IT/Sec, Q22/Q24 Sec and ExtIO)
• 3 mm stainless steel, white
• Delivery includes mounting parts and 2 stainless steel straps for pole diameters of 60 - 180 mm
• Wall mount (MX-OPT-WH) is not included in delivery and has to be ordered separately
  Alternatively, a set consisting of pole mount (MX-OPT-MH) and wall mount (MX-OPT-WH) is available

If you would like to mount either the MOBOTIX D22/D24 IT/Sec, Q22/Q24 Sec or ExtIO to a pole, you should consider using the MOBOTIX Pole Mount. This mount can only be used in conjunction with the wall mount. The supplied stainless steel straps allow attaching the mount to poles with diameters between 60 and 180 mm. The Pole Mount is made from 3 mm white powdercoated stainless steel and is just as robust and maintenance-free as the outdoor Wall Mount

Article number:
MX-OPT-MH

Set consisting of pole mount (MX-OPT-MH) and wall mount (MX-OPT-WH)

• Pole Mount for fastening of Dome wall mount
• 3 mm stainless steel, white
• Delivery with 2 stainless steel straps for pole diameters of 60 - 180 mm as well as mounting parts

• Wall mount is weather-proof (IP65) for protection of D22/D24 MonoDome
• Covers RJ45 wall outlets
• Space for expansion modules (battery, UMTS, WLAN, etc.)

Article number:
MX-OPT-WHMH

• Shock-resistant fiberglass-reinforced plastic (PBT), white
• Covers RJ45 outlet
• Ample room inside for extras (WLAN, relay, etc.)
• Polyurethane sealing for mounting to wall
• Includes stainless steel mounting supply, covers and dowels
• D12 DualDome with outdoor wall mount attains protection class IP 65 instead of IP 54

Mounting the camera to a wall allows covering RJ45 wall outlets (without frame) and also allows using a defined network end point. Ideally, the Outdoor Wall Mount is mounted over the tested wall outlet, which provides the connections (network, ISDN, Power over Ethernet) to the camera.

Article number:
MX-WH-Dome

• Fastening for Dome wall mount
• Can be mounted to 90° corners; one DualDome covers two sides
• 3mm stainless steel, white
• Includes screws and stainless steel straps for pole diameters 60-180mm
• Wall mount (MX-WH-Dome for D12 and D10) is not included in delivery

Article number:
MX-MH-Dome-ESWS

Set consisting of pole/corner mount (MX-MH-Dome-ESWS) and wall mount (MX-WH-Dome)

• Pole/corner Mount for fastening of dome wall mount
• Can be mounted to 90° corners; one DualDome covers two sides
• 3 mm stainless steel, white
• Delivery with mounting parts and 2 stainless steel straps for pole diameters of 60-180mm

• Wall mount consists of shock-resistant fiberglass-reinforced plastic (PBT), white
• Covers RJ45 wall outlets
• Ample room inside for extras (WiFi, relay, etc.)
• Polyurethane sealing for mounting to wall
• Includes stainless stell mounting parts, covers and dowels
• D12 DualDome with outdoor wall mount attains protection class IP65 instead of IP54

Article number:
MX-D12D-OPT-WHMH-Set

• Shock-resistant fiberglass-reinforced composite (PBT), white
• Turn/tilt unit with concealed cabling
• Covers RJ45 wall outlets > patented tamper-proof concealed cabling
• Can be turned left/right ± 90°, tilted downwards -70°
• Includes stainless steel mounting set, caps and dowels
• Fits all M12, M10 and M1 cameras

Article number:
MX-WH-SecureFlex

for M24, M22, M12 and M10

• 3mm stainless steel,white
• Mast or pole mounting
• Pole circumference from 60 to 180mm
• 2 x metal mounting bands, fittings and grommet included

Article number:
MX-MH-SecureFlex-ESWS