Inicio / Soporte / User Forum / Installation - ISDN / VOIP Settings

Navigation



VOIP Settings

« 
Previous topic
|
Installation - ISDN
|
Next topic
 »

You need to be logged in to get access to the forums. You can do so here.

Author Message

Richar...r Plas
Dhr.

Posts: 0

VOIP Settings

16 junio 2010 14:43:22

I'm trying to setup direct IP phone calls to the mobotix camera,
The grandstream VOIP phone i'm using lets me enter local RTP port, wich should be 5060.
The manual states the audio is transmitted on that port number, and the video on 5062

(text from manual:
This parameter defines the local RTP-RTCP port pair used to listen and transmit. It is the base RTP port for channel 0. When configured, for audio, channel 0 will use this port _value for RTP and the port_value+1 for its RTCP; channel 1 will use port_value+4 for RTP and port_value+5 for its RTCP. For video, channel 0 will use port_value+2 for RTP and port_value+3 for its RTCP; channel 1 will use port_value+6 for RTP and port_value+7 for RTCP. The default value is 5004)

But setting the mobotix to SIP port 5060 Audio port 5060 and video port 5062 creates an error stating that the SIP and audio port cannot be the same..

my conclusion is that i need to set 3 ports on the mobotix and i can only set 1 for the Grandstream VOIP.
A can call the mobotix using Direct IP, and get the pickup sound But i dont have any video/audio from the camera.. dialing from the camera to the Grandstream gives nothing at all.