Accueil / Services / Forum utilisateurs / Settings - Administration / Mobotix and Davis weather station

Navigation



Mobotix and Davis weather station

« 
Rubrique précédente
|
Settings - Administration
|
Rubrique suivante
 »

Vous devez être connecté pour pouvoir accéder aux forums. Vous pouvez le faire ici.

Auteur Message

simone monica

Publications: 0

Mobotix and Davis weather station

Vendredi 19 Mai 2006 12:11:06 pm

Hello,
I'd like to connect my Mobotix M10 d43 to a Vantage Pro weather station.
Someone of you have already tried to do this? Do you have some instructions?

Thank you,

Simone

Vatikiotis


Publications: 0

Mobotix + Davis

Jeudi 29 Juin 2006 12:34:59 pm

Hello Simone,
This guy has given good instructions at http://www.windfinder.com/wind/webcam_en.htm
The weather data are embed at the image. This way you cannot use it for other purpose.
You can also FTP the weather data as binary ( what is read from weather link) to a server, however, I have not found a solution yet
how to convert the binary file to a readable weather data file.
Any help by someone?
Panos

Peter Lovelius

Publications: 0

Connect Davis Vatnge Pro with Mobotix M10 and M12

Dimanche 21 Janvier 2007 11:05:57 pm

We have done it. We connect both M10 and M12 with Davis Vantage Pro.

See the link.
We have instruction and special made cabel(M12) for it.

http://www.vader.se/democamera.html

it is updated every minute but we are coming up with it live as soon as port problem in our router is fixed.

My mail is: pl@vader.se

Peter Lovelius

Publications: 0

Both weather info in camera and to weatherlink

Mardi 16 Octobre 2007 8:29:56 am

We have a solution to show weather information in the camera+weatherlink and in our own design webb page. We only use one vp 2 to do this.

We can also do remote reading the weatherstation

If you are looking for this type of solution we have it.

Peter Lovelius
pl@vader.se

Darren Oh

Publications: 0

Pinout?

Lundi 07 Juillet 2008 9:37:11 pm

Peter, would you be willing to save us some time by sharing the pinout here?

Darren Oh

Publications: 0

Complete instructions for Vantage Pro and M12D

Mardi 08 Juillet 2008 9:15:45 pm

1. Order the WeatherLink Data Logger for Vantage Pro from Davis (part #06510SER).

2. You must make an adapter to connect the WeatherLink cable to the camera. You will need a male 15-pin connector to connect to the camera. The other end of your adapter can be either a 9-pin male connector to connect to the 9-pin RJ11 adapter that comes with the WeatherLink cable or an RJ11 connector.

Pinout for creating a 9-pin to 15-pin adapter:
D-sub 9 M12D
1 --DCD--
2 --RxD-------RxD-- 2
3 --TxD-------TxD-- 3
4 --DTR--
5 --GND-------GND-- 5
6 --DSR--
7 --RTS-------RTS-- 7
8 --CTS-------CTS-- 8
9 --RING-

Pinout for creating your own RJ11 adapter:
RJ11 M12D
1 ------
2 --VCC--
3 --GND-------GND-- 5
4 --TxD--. ,--TxD-- 3
X
5 --RxD--' `--RxD-- 2
6 -------
,--RTS-- 7
|
`--CTS-- 9

3. In the camera administration, set up the serial interface for weather. The speed must match the baud rate of your weather console. The console's baud rate is 19200 by default. The Vantage Pro weather station does not send data autonomously, so you must choose a refresh interval.

4. To display weather information in the camera's output, type the text and variables you want to show in the text box. Otherwise, set up the raw data log and FTP settings to save the weather station's data.

David Heggli

Publications: 0

RJ-11 to 15pin Adapter

Vendredi 30 Janvier 2009 11:22:18 am

Hi Darren Oh!

Thanx so much for your help - but there are some questions I cannot resolve:

RJ11 M12D
1 ------
2 --VCC--
3 --GND-------GND-- 5
4 --TxD--. ,--TxD-- 3
X
5 --RxD--' `--RxD-- 2
6 -------
,--RTS-- 7
|
`--CTS-- 9

=> I have to bridge Pin #7 and #9 on the 15pin male connector?
=> what does pin #2 mean with VCC?

Which colors do these cables have?

I've got -black,red,green,yellow- on the RJ11 cable from Weatherlink...
If you or somebody less ignorant than me could explain exactly what I have to do with the colors of the cables, that would help a lot
Explanation in German would be fine also....

David Heggli

Publications: 0

I just found the (very easy solution) to connect the Weatherlink with the Mobotix 15pin serial connector

Vendredi 30 Janvier 2009 12:16:34 pm

15-Pin-Plug (you need only the first row of the 15pins):

This is how you have to solder the connector:
Pin#
1
2 ---- green cable
3 ---- yellow cable
4
5 ---- red cable

Enjoy & thanks for your help guys! )

David

tutoip
Sr.

Publications: 0

connection problem with nine-to 15-Pin with station davis vantage pro 2

Samedi 12 Juin 2010 2:42:44 pm

hello

could someone please put the outline of the connection of the 9-pin to 15 pin cable with the colors because I'm trying .. and no way.

Günter Dull

Publications: 0

deleted

Mercredi 23 Février 2011 3:13:20 pm

deleted

Joe Davis

Publications: 0

Ive done this

Vendredi 03 Février 2012 10:24:24 am

I realize it has been years since you have asked this but I noticed there isnt a lot of information out there on the subject.
You can connect a davis station to the camera via the cameras serial port (if it has one) or to the cameras usb port (via a usb to serial adapter)
You can also have the weather information that is hosted on the web from your davis station displayed in your camera image by having a php script embed the data from your weather station.