T24 IP door station with Iphone

To answer your question....

Lundi 02 Janvier 2012 2:49:41 am

setup -> action group overview -> create "Buttonpush" - Add action from phone profiles to call

That is the easy part.

To get the camera to actually make a call is much more irritating and I still don't have it working.

Admin -> SIP Server

On
IP = T-24 IP
Port 5061
realm = domain name
Missed calls = show
add one user

Address = username, make up a username and password and use this info to config vippie.

Admin -> SIP client

Enabled

Under SIP accounts, there are two options:
a.) A Video SIP provider will provide the info - I don't have a good one. Any recommendations for a provider than works w/H.264 in the US?
b.) Use the IP of the T-24 and make it a registrar

Anyone set up the STUN server? I didn't.

Admin -> Outgoing calls

This is where you setup and config your 'phone profiles'. I don't think mine are correct...

I used the IP address of my iPAD/iPhone, SIP Video, etc...Tried ports 5061 and 5060...

Admin -> Incoming calls

VOIP
Added a welcome msg and a PIN, Intercom mode, etc.

In addition to all of that, you need to enable your router to format ports 5060,5061,7078,9078,10000,10020?

So what did I do wrong that:
1. Doesn't allow the T-24 to call out
2. Doesn't allow my iPAD to see video (but it does work w/audio)
3. Doesn't allow my iPhone to see video if 3G, but it can see video on the local net.

iPhone has audio_video, iPAD = audio only

Lundi 02 Janvier 2012 6:58:31 pm

At this point, I have audio+video working on my local net w/iPhone Vippie - both ways - calling the T-24 and receiving from the T-24.

However, when the call is made to my iPAD2, it is always just audio.

Any ideas???

-mark

Dialing into D14

Dimanche 29 Janvier 2012 3:10:40 am

Hi All,

I'm at the end of my rope. Just got my first Mobotix camera (a D14) and I'm trying desperately to set up the SIP server so that I can call into it.

I've followed Matteo's instructions, but I'm uncertain as to what I should actually be dialing from Vippie itself. At this point, I haven't even attempted to set it up outside my local LAN because I can't even get that working!

Here's a run-down of my setup if anyone can help:

On the D14:

Admin --->> Sip Server Settings:

Sip Server: On
Server IP: 192.168.167.67 (the IP of my camera)
Port: 5061
Realm: 192.168.167.67
missed calls: show
Sip accounts:
100 @ 192.168.167.67 username: 100 passord: 100
*201 @ 192.168.167.67 username: 100 passord: 100

Incoming Call Settings:
Phone call in: VoIP
Accepted Phone... I've left it blank
Accepted SIP... I've left it blank
Welcome Message: Cuckooclock
Pin code: 1234
Audio mode: Intercom
Itercom settings: Medium Duration medium
Hangup after 5 minutes
Email profile: disable

In Vippie, I have the account settings as follows:

username: 100
password: 100
Auth username: 100
server: 192.168.167.67
Port: 5061
Outbound Proxy: On
Host: 192.168.167.67
Port: 5061

What I'm uncertain about is what I'm actually supposed to dial from the Vippie client. 100? *100? 100@192.168.167.67? I've tried about 10,000 versions of that. Is there something else that I'm supposed to setup on the Mobotix itself? When I dial anything in Vippie, I typically just get the "busy here" message.

Thanks for any help.

Cheers,
Stephen

Good day.

Dimanche 12 Février 2012 6:49:02 am

This is very great, really help me a lot.
Great answers or post to know. Very huge info from here.

Vippie: how to get from audio to video?

Lundi 13 Février 2012 9:01:34 pm

I installed vippie using the tips in this forum and i can call from my iphone to the T24 and the T24 calls my iphone when someone rings at the door. But, I only get audio and no video. I am only using the internal netwerk so it should be easy but I can't get it to work! any ideas?

Video on Vippie

Mardi 14 Février 2012 9:34:15 pm

@Matteo

Thanks for your response. Unfortunately I did not succeed yet. I have version 4.0.4.28 installed on the T24 and I tried both H.264 and H.263+ but no luck. Do I need to upgrade to the next version?

video works but not very stable

Mercredi 15 Février 2012 5:18:41 pm

@Matteo
I kept on trying with the Vippie app and I have video now. It was not the codec (using H.261 now) but it looks like it was a memory problem on the iphone that Vippie can't handle. When I shut down all running apps it works. It is not very stable though because sometimes the video freezes. The grandstreams (I have three of them) work all the time. I will do some more testing to see if Vippie is the best possible mobile client for the T24.
Thanks for your help.

@mobotix (they will probably never read this) After more than 1.5 year I have a working solution with the T24 where all my three grandstreams ring at the same time when someone rings at my door (this works since a week). And I have a working mobile solution on my Iphone from a third party instead of the promised Mobotix app. You should be very happy with guys like Matteo that take the time to answer the questions your support staff should answer. Or do you secretly work at Mobotix Matteo? I can imagine that you are not proud to admit to this

Background mode

Lundi 05 Mars 2012 5:48:33 pm

Vippie
Open Vippie > Settings > Account Settings > Oubound Proxy: Use in Background mode = ON

Linphone
iPhone/iPad Settings > scroll down to Linphone > Advanced: Background mode = ON

Hope this helps!

re:

Samedi 24 Mars 2012 4:49:57 pm

Arvind wrote "The T24 unit return ERROR 8, the Bell, Key, ESC, and OK menu and LED above Bell flashes all the time."

In order to make sure the keypad is communicating with the camera check the status in:

http://[camera-ip]//admin/mxbus_manager

The status of the keypad should be 'running'

vippie with iPhone in standby mode

Mardi 10 Avril 2012 1:53:22 pm

Hello,

Although i have the "Use in Background mode = ON" in Vippie, when pressing the bell button with the iPhone in standby mode, we hear the busy sound.

Thanks.