T24 - Compatible wall mount touchscreen.
Vous devez être connecté pour pouvoir accéder aux forums. Vous pouvez le faire ici.
| Auteur |
Message |
|
Mathew Walsh
Mr.
Publications: 0
|
T24 - Compatible wall mount touchscreen.
Mercredi 11 Mai 2011 4:22:43 am
I am looking at having a T24 installed and would like to use a wall mounted 5 to 8 inch touch screen VOIP/SIP compliant display as the indoor unit.
Maybe something like:
http://www.connectedhom...ouch-screens-now-available
I see the Grandstream GXV3140 is a recommended internal VOIP phone unit. I was not after the phone handset set arrangement, rather a standalone wall mounted display with the following features:
- Display
- Camera
- Microphone
- Interface to unlock door.
Has anyone already done this or have something they can recommend that I could source from Australia.
thanks
Mathew
|
|
Dirk van Cuijk
Dhr.
Publications: 0
|
touchpanel
Mardi 30 Août 2011 3:49:36 pm
I use the Busch & Jeager Comfort Panel.
|
|
Mathew Walsh
Mr.
Publications: 0
|
Any more suggestion for touch panel
Mercredi 02 Novembre 2011 9:37:16 am
Thanks for the reply. Can't seem to find a distributor in Australia.
Any other suggestion for a viewing screen for inside intercom with the t24.
I had the t24 setup for 3 - 4 months now but it really doesn't do the job I was hoping for.
I just wanted to be able to communicate from the front door to several internal wall mounted screens, with door control. I thought I could have it preview the outside footage prior to connecting ( VoIP), no computers running no mx software. A stand alone system operating as a standard intercom with the added functionality of ip based technology.
I think I should have done a bit more research prior to purchasing the Mobotix T24.
Cheers
|
|
Bert Blomme
Publications: 0
|
Mimo
Mardi 13 Décembre 2011 8:16:27 pm
I found this:
http://www.mimomonitors...ions/mimo-plugs-with-esata
Tech data:
Kirkwood Series processor with an embedded Marvell Sheeva 1.2 GHz CPU equipped with 512 MB of FLASH and 512 MB of DRAM.
I dont now of it is possibole to view the camera pictures wit this screen?
|
|
Carlos Cruz
Mr.
Publications: 0
|
Another option
Dimanche 15 Janvier 2012 1:43:29 pm
If you dont like the phone handset arrangement of the GXV3140 you might like the GXV3175.
|
|
Matteo Lugaresi
Sig.
Publications: 1
|
GXV3175 is not 100% ok with T24
Dimanche 15 Janvier 2012 4:05:38 pm
Pay attention, the GXV3175 is not 100% compatible with T24; for example the OSD (On Screen Display) is not completely shown during a video call and there might be further limitations.
Currently only GXV3140 is fully suported and recommended.
|
|
Matteo Lugaresi
Sig.
Publications: 1
|
Coming soon...
Vendredi 27 Janvier 2012 10:19:26 am
In regards to the GXV-3175, the integration is under development from both sides Grandstream/Mobotix to have full integration of the GXV-3175 as well.
If you do have any specific issue like registration/Call Features using the GXV-3175, please feel to contact Grandstream directly at :
http://www.grandstream.com/support/submit-a-ticket
|
|
Guille...riguez
Publications: 0
|
T24 - Compatible wall mount touchscreen
Lundi 30 Janvier 2012 6:30:18 pm
Hello Mathew,
You might want to look into this:
http://www.iddero.com/en/products/20-hc2-knx
It is a 7" wall mounted touch panel with direct support for the Mobotix T24 video door phone.
I think this product meets all your requirements:
- You can receive VoIP calls from the T24
- You can preview video from the T24, without establishing a VoIP connection
- You can open the door from the touch panel (also without establishing a VoIP connection)
- This is a standalone unit. No computer and no Mx software is required.
(Full disclosure: I work for Iddero)
Best regards,
Guillermo Rodriguez
www.iddero.com
|
