Simple Installation

T24: Build A Network Quickly, Easily And Cost Effectively

What does a typical system look like and what kind of cabling is needed? The system image shows the schematic structure of an access control system with the T24 including the Hemispheric camera, keyless entry, info module and an additional security door opener from MOBOTIX for inside installation next to the door. The T24 network connection and power supply are supplied via an Ethernet cable (PoE technology) or alternatively using the Mx2wire expansion set via a two-wire bell wire. This way, the existing doorbell or simple door intercom system can be replaced by a versatile access control system with a high-resolution MOBOTIX door camera with little extra effort or cost.

Fast, Simple Installation

In new constructions, MOBOTIX recommends connecting a CAT7 cable directly to the door station. In renovations of older buildings, the existing bell wires can be used further together with the Mx2wire technology (also with Siedle Vario).

Simple Connection Of Individual MOBOTIX Modules

The T24 outdoor station requires just one cable for data andpower (via a CAT cable or two wires with Mx2wire) to connect to a PoE switch and thereby to any expandable Ethernet network. In addition to the outdoor station, you can also install additional modules indoors that can connect to the T24 over the network via a switch or MxBus. In this way, the keypad is also the perfect access module for adjacent spaces or rooms. Or you can use a transponder card to switch the alarm system in the building on and off. Additional MOBOTIX modules are currently in development.

Info Module With Mx2wire Technology (Renovation/Older Buildings)

The MOBOTIX info module for the T24 outdoor station is not only a weatherproof module with a backlit house number field lit by economical, long-lasting LEDs. It can also be ordered with an optional Mx2wire unit. This unit is needed if the T24 is to be connected to the PoE switch with an existing bell wire via a second Mx2wire unit instead of directly using an Ethernet cable.

The Mx2wire technology was developed by MOBOTIX and is characterized by the fact that it is able to transfer data and power simultaneously using two-wire cables such as bell wire, coaxial cable, etc.

Hemispheric Video For Siedle Vario

The T24 modules were engineered by MOBOTIX to be retrofitted into the Siedle Vario module system at little additional effort and cost. The individual Siedle modules are integrated into the system using a specially-developed MOBOTIX IO terminal board that can be clicked directly into the Siedle module located directly below the MOBOTIX camera module. MOBOTIX offers the modules in four Siedle colors.