{\rtf1\ansi\ansicpg1252\cocoartf1187\cocoasubrtf390
\cocoascreenfonts1{\fonttbl\f0\fnil\fcharset0 LucidaGrande;}
{\colortbl;\red255\green255\blue255;\red29\green37\blue135;\red38\green32\blue135;}
{\*\listtable{\list\listtemplateid1\listhybrid{\listlevel\levelnfc23\levelnfcn23\leveljc0\leveljcn0\levelfollow0\levelstartat1\levelspace360\levelindent0{\*\levelmarker \{disc\}}{\leveltext\leveltemplateid1\'01\uc0\u8226 ;}{\levelnumbers;}\fi-360\li720\lin720 }{\listname ;}\listid1}
{\list\listtemplateid2\listhybrid{\listlevel\levelnfc23\levelnfcn23\leveljc0\leveljcn0\levelfollow0\levelstartat1\levelspace360\levelindent0{\*\levelmarker \{disc\}}{\leveltext\leveltemplateid101\'01\uc0\u8226 ;}{\levelnumbers;}\fi-360\li720\lin720 }{\listname ;}\listid2}
{\list\listtemplateid3\listhybrid{\listlevel\levelnfc23\levelnfcn23\leveljc0\leveljcn0\levelfollow0\levelstartat1\levelspace360\levelindent0{\*\levelmarker \{disc\}}{\leveltext\leveltemplateid201\'01\uc0\u8226 ;}{\levelnumbers;}\fi-360\li720\lin720 }{\listname ;}\listid3}}
{\*\listoverridetable{\listoverride\listid1\listoverridecount0\ls1}{\listoverride\listid2\listoverridecount0\ls2}{\listoverride\listid3\listoverridecount0\ls3}}
\paperw11900\paperh16840\margl1440\margr1440\vieww18320\viewh18880\viewkind0
\deftab720
\pard\pardeftab720

\f0\b\fs36 \cf2 Version 1.6.1 (Release) of MxEasy\
\pard\pardeftab720

\fs24 \cf2 \
\pard\pardeftab720

\b0 \cf0 Creation Date: 2013-09-05\
Publishing Date: 2013-09-10\
\
\pard\pardeftab720

\b\fs32 \cf2 \
Enhancements and Improvements\
\
\pard\pardeftab720\sa420

\fs28 \cf3 Enhanced Door Station Functions\
\pard\tx220\tx720\pardeftab720\li720\fi-720
\ls1\ilvl0
\b0\fs24 \cf0 {\listtext	\'95	}
\b Using S14/S15 cameras as door station
\b0 \uc0\u8232 When adding an S14 or S15 to MxEasy, the application will prompt you to decide whether or not this camera is being used as a door station. If this is the case, you can configure the S14/S15 camera as a door station and use it as such afterwards. Note that you can use the same door station components and other options as in a regular T24 Door Station and that the application uses the same configuration dialogs.\
{\listtext	\'95	}
\b Support of the BellRFID module
\b0 \uc0\u8232 A door station (S14, S15, T24) can now be configured and used together with the new BellRFID button module as an alternative to a KeypadRFID module. MxEasy supports setting up the bell rules and can also be used as a remote station for answering the calls.\
\pard\tx566\pardeftab720
\cf0 \

\b Note:\

\b0 In order to be able to use the functions described above, the corresponding cameras needs to run software release 4.1.9.x or higher.\
\
\pard\pardeftab720\sa420

\b\fs28 \cf3 Intercom for all P3 Cameras\
\pard\pardeftab720\sa320

\b0\fs24 \cf0 MxEasy can now establish a two-way intercom connection to any P3 camera (Q24M, D24M, M24M, T24, S14, S15, D14, D15, M15) with activated echo cancellation. Up until now, this was only possible using a T24 door station; all other camera models only supported the Push-to-Talk mode. If echo compensation has not been activated in a camera, you can now do so in the Camera Option dialog of MxEasy.\
For further information on configuring and using such a camera as a door station, download the MxEasy 1.6.1 User Manual from {\field{\*\fldinst{HYPERLINK "http://www.mobotix.com/other/Support/Manuals/Software2/MxEasy"}}{\fldrslt www.mobotix.com/other/Support/Manuals/Software2/MxEasy}}.\
\pard\tx566\pardeftab720
\cf0 \
\pard\tx566\pardeftab720

\b\fs32 \cf2 Known Limitations\
\
\pard\tx220\tx720\pardeftab720\li720\fi-720
\ls2\ilvl0
\b0\fs24 \cf0 {\listtext	\'95	}
\b Configuring an S14D/S15D as door station
\b0 \uc0\u8232 If you are using the MxEasy Wizard to add an S14D/S15D to the system that had been configured as a door station before (by pressing the camera buttons and executing the auto configuration), parts of the door station configuration may be deleted. This is the case if the Keep automatic configuration settings option is being used. In order to prevent this from happening, it is recommended to add such a camera using the Quick Start option in the MxEasy Wizard and to change the door station options afterwards in the Door Station Options dialog.\
\pard\tx566\pardeftab720
\cf0 \
\pard\tx220\tx720\pardeftab720\li720\fi-720
\ls3\ilvl0\cf0 In addition, the same restrictions as for MxEasy 1.6 apply.\cf2 \
}