MOBOTIX

Release Notes for MOBOTIX Camera Software

Document Information

Publisher: MOBOTIX AG
Author: Bernd Wilhelm
Thilo Schüller
Date: 2021-09-28
Document: release-notes_V5.4.6.3_en_v1.html
Confidentiality: public

Contents

These Release Notes contain a technical description of the most important changes in the software for the MOBOTIX network cameras.

Software Releases—Overview

Release Version Creation Date Publishing Date
MX-V5.4.6.3 2021-09-21 2021-09-28
MX-V5.4.0.55 2021-04-21 2021-06-02
MX-V5.4.0.49 2020-12-11 2020-12-16
MX-V5.4.0.45 2020-11-09 2020-11-12
MX-V5.4.0.44 2020-09-17 2020-09-18
MX-V5.2.6.7 2020-06-16 2020-06-24
MX-V5.2.6.4 2020-05-15 2020-05-20
MX-V5.2.6.2 2020-04-23 2020-05-05
MX-V5.2.5.15-r1 2020-03-05 2020-03-12
MX-V5.2.5.15
(replaced by MX-V5.2.5.15-r1)
2020-01-28 2020-02-14
MX-V5.2.4.15-r2 2019-09-25 2019-10-01
MX-V5.2.4.15
2019-07-26 2019-07-31
MX-V5.2.3.30 2019-04-11 2019-04-15
MX-V5.2.1.4 2018-12-20 2018-12-20
MX-V5.2.0.61 2018-10-30 2018-11-02
MX-V5.1.0.99-r4 2018-10-24 2018-11-06
MX-V5.1.0.99-r3
(replaced by MX-V5.1.0.99-r4)
2018-07-11 2018-07-13
MX-V5.1.0.99
(replaced by MX-V5.1.0.99-r3)
2018-06-15 2018-06-15
MX-V5.0.2.14 2018-02-07 2018-02-14
MX-V5.0.1.53 2017-10-26 2017-11-20
MX-V5.0.0.133 2017-07-21 2017-08-08
MX-V5.0.0.130 2017-06-21 2017-07-14
MX-V5.0.0.127 2017-04-27 2017-05-05

Notes:


top

Software Release MX-V5.4.6.3 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, T26, c26, i26, p26, v26

Creation Date: 2021-09-21

Publishing Date: 2021-09-28

Important Notes

Enhancements and Improvements

Enhanced Text Variables

 The following applies:

Other Enhancements

Bugfixes

Known Limitations

The version contains the same known limitations as the version  MX-V5.2.4.15/.15-r2.


top

Software Release MX-V5.4.0.55 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, T26, c26, i26, p26, v26

Creation Date: 2021-04-21

Publishing Date: 2021-06-02

Important Notes

Improvements

By implementing the "HTTP Strict Transport Security (HSTS)" security mechanism for HTTPS connections, the camera was further protected against certain cyber attacks.

Note

The configuration settings necessary for the use of HSTS cannot be made in a web browser dialog, but must be entered directly in the JSON configuration scheme of the camera. A detailed description of the necessary steps can be found in the online help for the web server dialog <camera IP>/help/help?webserver.

The Admin > Hardware Configuration > Image Sensor Configuration dialog can now also be used with connected 5MP sensors. By selecting the value  Double Lens Carrier PAN/180 as the Lens Carrier Type,  the special panorama view of the D16 panoramic models can also be configured with these sensor modules.
The audio connection to a camera (e.g. the transmission of the PC microphone signal to a door station) via MxWeb does not work via the HTTP protocol, but requires an HTTPS connection from the web browser to the camera. This is now checked and an error message is displayed if necessary.
As a matter of this change, even large HTTP get requests (with more than 2K data) can now be sent to the camera without errors.
With this version, the notification (via push notification) of the MOBOTIX Live app also works on Android devices when they are in stand-by mode

Bugfixes

Known Limitations

The version contains the same known limitations as the version  MX-V5.2.4.15/.15-r2.


top

Software Release MX-V5.4.0.49 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, T26, c26, i26, p26, v26

Creation Date: 2020-12-11

Publishing Date: 2020-12-16

Note on version MX-V5.4.0.49

This version differs from the previous version 5.4.0.45 only in the bugfixes specified below.

Important Notes

Bugfixes

Known Limitations

The version contains the same known limitations as the version  MX-V5.2.4.15/.15-r2.


top

Software Release MX-V5.4.0.45 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, T26, c26, i26, p26, v26

Creation Date: 2020-11-09

Publishing Date: 2020-11-12

Note on version MX-V5.4.0.45

This version differs from the previous version 5.4.0.44 only in the bugfixes specified below.

Important Notes

Bugfixes

Known Limitations

The version contains the same known limitations as the version  MX-V5.2.4.15/.15-r2.



top

Software Release MX-V5.4.0.44 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, T26, c26, i26, p26, v26

Creation Date: 2020-09-17

Publishing Date: 2020-09-18

Important Notes


Enhancements and Improvements

Integration Protocols (RTP Server, ONVIF & Genetec Integration)

For this release, the RTP server as well as the ONVIF and Genetec integration drivers have been fundamentally revised and modified. The reasons for these changes were:

Changes compared to the previous version

Stream-Layout
The most prominent change is the new stream layout of the RTP server. Instead of offering up to nine streams with fixed encoders (1xH.264, 4xMJPEG and 4xMxPEG) simultaneously, the RTP server now supports 4 streams with configurable encoders:
This has changed the streaming URLs. The new URL patterns are:
For more information, see the help page of the Admin > Camera Administration > Integration Protocols dialog.
Image Control
This functionality has already been introduced step by step in the latest 5.2.x versions.
Resolutions
The list of available resolutions and scaling methods for creating these resolutions has also been changed.

The maximum resolution of H.264 or MJPEG streams might be lower than FullHD, depending on the live image’s current aspect ratio.

Legacy-Modus

Updating existing setups
Due to the many changes in the integration modules RTP, ONVIF and Genetec, the configuration in the area of Integration Protocols has also changed fundamentally. Upgrading existing setups to the new configuration can cause problems that require further user intervention.
To avoid such update problems in existing setups, the camera automatically migrates existing configurations as close as possible to the new configuration scheme. To do this, the camera activates a "Legacy Mode", in which it tries to mimic the behavior of the previous RTP, ONVIF and Genetec modules as close as possible. While this "Legacy Mode" is active, some features are disabled. The following behavior changes apply in “Legacy Mode”:

To exit the "Legacy Mode", simply use the Factory function in the Integration Protocols  dialog - after that all new configuration options are available.
Uploading Legacy Configuration Files
If you use the upload feature to load a .cfg file created by a firmware prior to 5.4.0, you must perform the following steps to migrate it properly:
  1. Open dialog Integration Protocols and set the Integration Protocol to "Off".
  2. Set and save the configuration in the flash
  3. Upload the Legacy Configuration File to the camera
  4. Save the configuration permanently in the flash
  5. Restart the camera
During the reboot, the camera migrates the settings from the uploaded configuration file.
Important notes
  1. Configuration migration is only recommended for updates from 5.2.6.x to 5.4.0.44.  To make the migration work best, we recommend that you upgrade the camera to 5.2.6.7 first and then to 5.4.0.44.
  2. Make a backup copy of your configuration before upgrading to version 5.4.0.44. If you decide to downgrade later, you will need to install the backup configuration to restore your Integration Protocol settings.
  3. Please check your settings after updating the firmware.
  4. Configuration migration cannot cover all possible scenarios. If something doesn't work as expected after upgrading to 5.4.0, we recommend that you reset the Integration Protocol settings to factory settings and reconfigure your streams.
  5. If you are using the Genetec Integration Protocol, please remove all multicast IPs in the stream configuration before the firmware upgrade. Genetec configures multicast through its own APIs, and additional multicast settings in the stream configuration can cause post-update streaming issues.


Cybersecurity and Network

Storage

Transfer Profiles

Thermal Delta Analysis

For Thermal TR camera models, the new Environment Event type Thermal Delta Analysis has been inserted. This makes it possible to trigger events when the temperature values determined in the Measurement Area rise or fall over a certain observation period. This type of event is also configured in the Environment Events section of the Setup > Event Control > Event Overview dialog. The following new options are specific to this type of event::

Note

The values to be entered for a Delta Threshold or a  Delta Range are always positive. If the Threshold Direction is set to Falling, the absolute value of a determined negative temperature difference is then compared with these values.

All other parameters correspond to those of the Thermal Radiometry event type.

Online Camera-Hilfe (OLH)

Other improvements

Bugfixes

Known Limitations

The version contains the same known limitations as the version  MX-V5.2.4.15/.15-r2.


top

Software Release MX-V5.2.6.7 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, T26, c26, i26, p26, v26

Creation Date: 2020-06-16

Publishing Date: 2020-06-24

Important Notes


Enhancements and Improvements

Thermal sensor shutter behavior  
Special applications for processing MOBOTIX thermal images require suppressing the triggering of the sensor's HW shutter at certain times to avoid any image changes by that. For this purpose, it is now possible to set the shutter's trigger times by means of special configuration entries. The required entries can be found via MOBOTIX Support (support@mobotix.com).

Bugfixes

Thermal image error
Starting with version 5.2.6.2, the thermal image could remain completely white or black in special situations. In addition, extremely noisy, pixelated images could occur.

Known Limitations

The version contains the same known limitations as the version  MX-V5.2.4.15/.15-r2.


top

Software Release MX-V5.2.6.4 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, T26, c26, i26, p26, v26

Creation Date: 2020-05-15

Publishing Date: 2020-05-20

Important Notes


Enhancements and Improvements

MxAnalytics with cumulative counting corridor evaluation

This version allows the accumulated evaluation of MxAnalytics counting corridors of several integrated cameras. The total calculated from them can be displayed in a separate dialog. For example, according to the corresponding definition of counting corridors at the entrances and exits of a shop, the customers are counted and evaluated as passes in "north direction" when entering and when leaving as passes in "south direction". The current number of visitors in the shop is then the difference between all passes in the north direction and the passes in the south direction and can be displayed in a separate dialog. The setup and display of the result are done as follows:

Bugfixes

Known Limitations

The version contains the same known limitations as the version  MX-V5.2.4.15/.15-r2.


top

Software Release MX-V5.2.6.2 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, T26, c26, i26, p26, v26

Creation Date: 2020-04-23

Publishing Date: 2020-05-05

Important Notes


Enhancements and Improvements

Thermal enhancements and other improvements

Bugfixes

Known Limitations

The version contains the same known limitations as the version  MX-V5.2.4.15/.15-r2.

top

Software Release MX-V5.2.5.15-r1 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, T26, c26, i26, p26, v26

Creation Date: 2020-03-05

Publishing Date: 2020-03-12

Notes on Release MX-V5.2.5.15-r1

This release is different from its predecessor release 5.2.5.15 only in the bugfix "Decimal temperature values for Thermal TR events".

Important Notes

General Improvements

Bugfixes

Known Limitations

The version contains the same known limitations as the version  MX-V5.2.4.15/.15-r2.


top

Software Release MX-V5.2.4.15-r2 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, T26, c26, i26, p26, v26

Creation Date: 2019-09-25

Publishing Date: 2019-10-01

Notes for Release MX-V5.2.4.15-r2

As compared to the predecessor release MX-V5.2.4.15, this release only brings the improvements listed under Bugfixes.

Bugfixes


top

Software Release MX-V5.2.4.15 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, T26, c26, i26, p26, v26

Creation Date: 2019-07-26

Publishing Date: 2019-07-31

Important Notes

Enhancements and Improvements

Support of Door Station Configuration (MxManagementCenter 2.1.1 and Higher)

Starting with release 2.1.1, MxManagementCenter offers a new wizard for initializing one or more door stations. After updating the camera software to the current release, you can use this wizard to initialize S26, S16, and T26 door stations.

Support of PelcoD PTZ Heads by MxManagementCenter (MxMC 2.1.1 and Higher)

This software release allows using MxManagementCenter to control MOBOTIX IoT cameras mounted to a PelcoD PTZ heads (MxMC 2.1.1 and higher). The following steps are required to use a PelcoD PTZ head:

Optimized Performance When Recording to CIFS Servers

When using a CIFS server as a primary target (=folder/file structure), or as an MxFFS archive, performance is boosted by a new caching strategy. The performance improvements are achieved by reducing the number of random access and file lock operations. The new caching strategy is applied when using the SMBv2 or a more recent version of the protocol.

Bugfixes

Known Limitations


top

Software Release MX-V5.2.3.30 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, c26, i26, p26, v26

Creation Date: 2019-04-11

Publishing Date: 2019-04-15

Important Notes

Enhancements and Improvements

Improved frame rates

This version achieves significantly improved frame rates. This applies mainly to high resolutions and M-JPEG or MxPEG with high motion rates, where increases of up to 96% can occur.

Improved image quality through new 3D noise filter

An additional optional time-based noise filter improves the image quality and reduces the data rate by up to 20%. This filter can be activated in the browser's user interface under Setup Menu > Image Control > General Image Settings with the Temporal Noise Filter option. The reduction is up to 20% on a 24-hour average and up to 50% on dark, noisy images. If stored on a NAS or file server, this leads to a noticeable relief of the storage device. Please note that the filter may reduce the frame rate depending on the picture settings and scene complexity. This is especially true if the camera is already delivering a reduced frame rate due to a high load situation or complex scene content, as would be possible under optimal conditions.

Genetec- and ONVIF-Integration

The integration of the cameras into ONVIF-Clients or the Genetec Security Center via the integration protocol has been greatly facilitated.

Other improvements

Bugfixes

Known Limitations


top

Software Release MX-V5.2.1.4 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, c26, i26, p26, v26

Creation Date: 2018-12-20

Publishing Date: 2018-12-20

Important Notes

Enhancements and Improvements

Improved Support of the Extended Camera Configuration in MxMC 2.0.1

This release supports the different enhancements and improvements of the camera configuration in MxManagementCenter (MxMC) 2.0.1 (e.g., for setting up a camera as a time server, setting up buffered archive).

Bugfixes

Known Limitations


top

Software Release MX-V5.2.0.61 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, T26, c26, i26, p26, v26

Creation Date: 2018-10-30

Publishing Date: 2018-11-02

Important Notes

Enhancements and Improvements

Door Station Features – Support of T26, S26, S16

With this release, the door station features are available on cameras of the Mx6 model range. The software supports the T26 door station as the successor of the T25, as well as the S26 and S16 models, which can also be used as door station when running this software release.

Notes

Support of MxMC 2.0 With Integrated New Features (Advanced Config, Health Check)

MxManagementCenter (MxMC) 2.0 includes an advanced camera configuration, which almost makes switching to the browser-based user interface of each camera unnecessary.

In addition, MxMC 2.0 contains the new Health Check feature. It allows testing all MOBOTIX IoT cameras of the Mx6 model range for problems regarding the system status. The results are displayed with traffic light icons (Green – no problems, Yellow – at least one warning in the system, Red – at least one critical state of one camera). If warnings (Yellow) and errors (Red) have been detected, the system will propose solutions and recommendations to resolve the issues.

For additional information on MxMC 2.0, please see the corresponding release notes and the integrated online help.

Enhanced System Performance

Many improvements in details of this software release have resulted in a perceptible increase in system performance. The increase in computing speed and the further stabilized, higher frame rates that can be attained in this release even under high loads (large image sizes, many camera features activated) are proof of the increased performance.

ONVIF S Extensions

Thanks to the additional ONVIF S audio features of release MX-V5.2.0.x, all MOBOTIX Mx6 camera models are conforming to ONVIF S after updating to this release (with or without microphone). The cameras will be listed in the near future as Conformant Products on the ONVIF website. In addition, this release also supports the PTZ features of the camera via the ONVIF S protocol.

Extended SNMP Support

The Admin Menu > Network Configuration > SNMP Configuration dialog now offers to download an SNMP MIB file, which can be used for subsequent requests by SNMP clients. SNMP clients can now get additional information regarding the current camera status, such as temperature, date and time, network properties, flash cell wear, etc.

MxAnalytics for Dual Cameras

You can now use MxAnalytics on dual cameras (e.g., the D16-B-F) if the camera uses only one image sensor ("Auto" image mode on Day/Night models and "Right" or "Left" on dual models).

Automatic Detection of Attached Image Sensors

In the D16, M16 and S16 camera models, the software now automatically recognizes the types of the attached sensor modules (6MP/5MP image sensors, Thermal sensors, MxDigitizer) and configures the system accordingly. The manual sensor module configuration by the user has thus become obsolete.

Enhancements for Thermal Cameras

Other Enhancements and Changes

Bugfixes

Known Limitations


top

Software Release MX-V5.1.0.99-r4 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, c26, i26, p26, v26

Creation Date: 2018-10-24

Publishing Date: 2018-11-06

Notes on Releases MX-V5.1.0.99-r3/r4

Release 5.1.0.99-r4 closes a security flaw in the RTP server found in its predecessor release 5.1.0.99-r3 that would have allowed aggressors to execute malignant software on the camera.

Release 5.1.0.99-r3 is different from its predecessor release 5.1.0.99 only in an additional enhancement ("Thermal Reference Windows") and two bugfixes ("S26 with external sensors" and "Image generation with special combinations of MxActivitySensor and MxAnalytics").

Important Notes

Enhancements and Improvements

New Storage Method "Buffered MxFFS Archive"

In the Admin Menu > Storage > Storage on external file server dialog, the new option Buffered MxFFS Archive can now be selected as the Primary Target. SMB / CIFS and NFS File Servers can also be used here as an MxFFS Archive Target.  As a result, data in MxFFS format is no longer stored first on the SD card but directly on a connected file server (e.g. NAS device). The internal SD card is then used only for storing some administrative information. Only in the case of a detected file server failure (e.g. lost connection) will the storage be automatically switched to the SD card. Once the file server is available again, the data previously saved on the SD card will be transferred to the server. Due to the significantly reduced load on the SD card, its service life is considerably extended.

Important Notes:

Support of Mx6-B Camera Models With MxBus

This release supports the use of MxBus features in the new B variants of the Mx6 models.

Support of the Camera Configuration in MxManagementCenter (MxMC)

As of version 1.8 of the MxManagementCenter (MxMC), the most important settings on the camera can be made from this program. For Mx6 camera models, the current or a newer version of the camera firmware is required to support that function in MxMC.

Automatic Request for Password Change And Password Length

When you first log in to the camera, the user is automatically prompted to change the default password ('meinsm') for the admin user. The new password to be entered must also be at least 8 characters long.

Improved Dual-Core Support

This firmware version now better supports the dual-core processor architecture of the Mx6 camera model. As a result, more functions can be performed by the camera at the same time, without negatively affecting the frame rate.

Improved Online Help

The online help's layout has been improved and all pages now start with an index including links to the different chapters. Additionally the online help page for the Admin Menu > Storage > Storage on External File Server/Flash Device dialog has been completely redesigned and important notes and best practices, mainly for the MxFFS archive, have been added.

Other Improvements and Changes

Bugfixes

Known Limitations


top

Software Release MX-V5.0.2.14 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, c26, i26, p26, v26

Creation Date: 2018-02-07

Publishing Date: 2018-02-14

Important Notes

Enhancements and Improvements

ONVIF S Compatibility

With this release, cameras of the Mx6 product range are compliant to the ONVIF S standard. With respect to the predecessor release, the following functions have been added for ONVIF:

Support of the Optional POS Features in MxManagementCenter (MxMC) 1.7 and Higher

From this version on, Mx6 cameras can be integrated with Vectron cash point systems (POS = point of sale) in order to transfer the transaction data of a cash point (e.g., the items on a sales slip) to MxManagementCenter. You can then use MxMC to search and retrieve the transaction data in different views. In addition, MxMC can play back the video recordings for individual transactions.

To set up such a system, a special script for MOBOTIX cameras needs to be installed and configured on the Vectron cash point. To set up the POS system on the camera, you need to follow the steps below:

After that, you need to license the feature in MxMC to be able to configure a new "Retail System" consisting of the cash point and the assigned camera. You can now search the transaction data of the cash point to retrieve the corresponding recordings in the special "Retail view" of MxMC.

For additional information about this new feature, please also see the Online Help of the camera.

Bugfixes

Known Limitations


top

Software Release MX-V5.0.1.53 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, c26, i26, p26, v26

Creation Date: 2017-10-26

Publishing Date: 2017-11-20

Important Notes

Enhancements and Improvements

MxPEG+ Video Codec

Together with the new Mx6 hardware, the proprietary MxPEG video codec by MOBOTIX has been improved to MxPEG+. This codec is now the default codec on Mx6 cameras, although the visible name has not changed. From this release onward, the "MxPEG" codec actually uses the much more efficient MxPEG+ variant, which uses significantly less bandwidth for displaying and storing the video stream than its predecessor. Using MxPEG+ instead of MxPEG typically saves about 25 % in bandwidth. In dark scenes or at night, the increased efficiency is much more significant – the required bandwidth drops by up to 50 %.

MxActivitySensor 2.1

MxActivitySensor 2.1 of this release uses a significantly improved strategy compared to its predecessor release 2.0. The main objective is to avoid false alarms that occurred in a scene due to changes in illumination or light shadows, for example. The basic functionality and the sensor settings have not changed from MxActivitySensor 2.0.

ONVIF Enhancements

This release contains some important enhancements regarding ONVIF:

Bitrate Control for H.264 Streaming

You can now set H.264 streaming to maintain image quality and to reduce the frame rate instead, if required. This happens only if the defined bit rate (bandwidth) is exceeded. Open the Admin Menu > Camera Administration > Integration Protocols dialog, go to the H.264 Settings section and activate the new Constant Quality Mode option.

Support of the New MxIOBoard-IC Module for x26 Indoor Cameras

Thanks to the new MxIOBoard-IC Module, the c26, i26, p26, and v26 camera models can use two signal inputs and two signal outputs (isolated relay or 12 V self-powered). The module is to be wired fully before it is plugged onto the powered-off camera's mainboard. After finishing the installation and starting the camera, the module is recognized automatically and listed in the Camera Status dialog in the System section.

You can immediately use the signal inputs to define signal event profiles in Setup Menu > Event Overview. Likewise, you can immediately use the signal outputs to define signal output profiles in Admin Menu > Hardware Configuration > Signal Out Profiles. In addition, the signal inputs and outputs are automatically listed in the Admin Menu > Assign Wires dialog so you can use them immediately for door and light features. Input 1 is assigned to the door sensor, Input 2 to the lock sensor, Output 1 is assigned to the door opener and Output 2 to a light switch.

If you want to use one or both signal outputs not as isolated relay outputs, but as self-powered 12 V outputs, you set this mode for the desired outputs in the Admin Menu > Hardware Configuration > Manage Hardware Expansions dialog, MxBus/IO Board section.

Other Enhancements

Bugfixes

Known Limitations


top

Software Release MX-V5.0.0.133 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, c26, i26, p26, v26 − With Thermal Sensors as well as 6MP and 5MP Image Sensors

Creation Date: 2017-07-21

Publishing Date: 2017-08-08

Important Notes

Enhancements and Improvements

Support of FTPS (TLSv1, TLSv1.1 and TLSv1.2)

This software release supports file transfers of the camera using FTPS (FTP via Transport Layer Security). The supported TLS versions are TLSv1, TLSv1.1 and TLSv1.2.

Other Improvements

Bugfixes

Known Limitations


top

Software Release MX-V5.0.0.130 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26, c26, i26, p26, v26 − With Thermal Sensors as well as 6MP and 5MP Image Sensors

Creation Date: 2017-06-21

Publishing Date: 2017-07-14

Important Notes

Enhancements and Improvements

Support of Mx6 Indoor Camera Models

This software release also supports the new Mx6 indoor camera models i26, c26, p26 and v26. As a consequence, the new features of the Mx6 camera line are also supported on these models (noticeably higher frame rates, H.264 video streaming, ONVIF etc. In addition, the design and the handling of the i26, c26, p26 and v26 cameras does not differ from their predecessor models of the P3 camera line.

Factory Default Settings changed

The following factory default settings have been changed in this version:

Note: If you do not want the ONVIF services to be activated automatically you have to deactivate them explicitely in the dialog mentioned above.

Event Stream Group Right for Integrating Cameras into MxManagementCenter

To integrate a MOBOTIX camera into MxManagementCenter (MxMC), you had to use the access credentials of a user with admin rights on the camera.

This software release provides a better solution: In the Admin Menu > Security > Group Access Control Lists, you can now add a new group with the new Event Stream right. If you are using the credentials of such a user to integrate the camera into MxMC, you can use all features of MxMC (except updating the camera software). In addition, the user cannot make any configuration changes in the browser-based user interface of the camera.

Separating the rights in such a manner has significantly increased the system security, especially where larger installations are concerned.

Enhanced Security Thanks to Special Characters in Passwords

Firmware release MX-V5.0.0.130 (just like MX-V5.0.0.127) allows using special characters to create more complex passwords (Admin Menu > Security > Users and Passwords). This again increases the protection against unwanted camera access. To prevent problems when logging in from different browsers, all printable special characters from the US ASCII character set are allowed:
! " # $ % & ' ( ) * +, −. /:; < = >? @ [ \ ] ^ _ `{ | } ~.

ONVIF Description

The online help for the ONVIF integration has been extended.

Bugfixes

Known Limitations


top

Software Release MX-V5.0.0.127 − for Mx6 Camera Models D16, M16, S16, V16, D26, M26, Q26, S26 − with Thermal Sensors as well as 6MP and 5MP Image Sensors

Creation Date: 2017-04-27

Publishing Date: 2017-05-05

Important Notes

The following list describes the new features, enhancements and improvements as compared to the P3 models (software releases V4.x).

Enhancements and Improvements

Higher Frame Rates

As mentioned above, the Mx6 models display noticeably higher frame rates with less variation as in the P3 camera models. This is mainly due to the higher computational power of the dual-core processor. The frame rate can reach 42 fps when using HD image size (1280x720), the MxPEG video codec and Normal image quality:

Note: Select the Fast image program from the Quick Controls to automatically apply all settings that result in the highest possible frame rate.

RTP Streaming, H.264 and Genetec Integration

To integrate these camera models into other video management systems, you can use RTP streaming, H.264 and a special Genetec integration interface. Open the Admin Menu > Camera Administration > Integration Protocols dialog and activate the RTP Server and/or Genetec options to use these features.

Notes:

ONVIF Integration

This is the first software release to support the ONVIF standard; it complies with many basic features of this global and open communication standard. Currently, the following ONVIF features or codecs and protocols are supported: Discovery Service, Digest Authentication, Scope Management, Profiles with Reset via Web UI, H.264, M-JPEG, RTP, TCP, HTTP.

Open the Admin Menu > Camera Administration > Integration Protocols dialog and activate the ONVIF option to activate the integrated ONVIF support. If you activate the ONVIF Discovery Service in this dialog, you can also define ONVIF Scopes and show or delete the ONVIF Profiles created by an ONVIF video management system.

Bugfixes

The bugfixes described in the following refer to the software releases prior to release V5.0.0.127 that had been delivered with the first Mx6 camera models.

Known Limitations


Copyright © 1999 – 2020, MOBOTIX AG, Germany, support@mobotix.com