Release Notes for MOBOTIX MOVE
NVR-8/16 Models
Document Information
|
Publisher:
|
MOBOTIX AG
|
|
Author:
|
Thomas
Dieregsweiler
|
|
Date:
|
2022-02-25
|
|
Document:
|
release-notes_mb20220127NVR816_en_v1-1.html
|
|
Confidentiality:
|
public
|
Contents
These Release Notes
contain a technical description of the most important changes in the software for
the MOBOTIX MOVE NVR 8/16 channel devices.
Overview of Software Releases
Notes:
- Please
download the stable customer releases of the software from www.mobotix.com in the Support >
Download Center > Software Downloads section.
- After
downloading the software, please extract both files to the same folder.
The device needs both files at the same location in
order to verify the software before starting the installation.
- Please
send an email to support@mobotix.com
for feedback.
top
Creation Date: 2022-01-27
Publishing Date: 2022-02-25
New Features
- User-definable
PoE-Port DHCP start IP-address for cameras connected to the PoE port
directly
Note 1 : The default IP Start-address is
192.168.51.2
Note 2 : Camera needs to be configured as DHCP
to receive IP from NVR
- MOBOTIX IoT camera bidirectional audio supported
(P6/P7)
·
Central IP camera Password change for a batch of
cameras via local NVR
·
Support
adding IP camera device by Pull live stream from IP-Camera RTSP
URL
·
Change password length to be 8-16.
The supported characters are A-Z, a-z, 0-9, !#$%&'-.@^_~
Improvements
·
UI improvement - when parameter is saved, there will be "Save
succeeded" text shown on the bottom to indicate changed parameters saved.
·
UI improvement - under "Add device", user has
to unlock the camera lock symbol first to do any parameter change. After
the parameters are changed and camera locked, there will be pop up window
"Save succeeded"
·
UI Improvement - under guest mode, users don't need to logout first to
login as admin
·
In
“About-Window” additional SW Info available: Display of FW version,
release date, 3rd Party SW-licenses (GPL, GNU…)
Bugfixes
·
UI adjustment - Under live view, adjust character length to avoid text
being blocked when using German
·
UI adjustment – Setup > Display > Video display mode shall show
English
Setup > PoE / Ip-Port Management >Advanced “Save” corrected to English
top
Software Release mb20210902NVR816 for MOBOTIX MOVE
Mx-S-NVR1A-8/16-POE
Creation Date: 2021-09-02
Publishing Date: 2021-09-15
New Features
- Optimized DDR
configuration to avoid system crash under high loading
- Streaming
load control: if the main
stream is more than 4K resolution and stream 2 is more than D1
resolution, we will have an exclamation mark to inform the user the
resolution is more than recommended value. When mouse hovers over the
mark, a warning message “Camera Resolution is out of range” will be
displayed
- New
option for support of camera reboot from UI in “Live
view > Camera system setup" dialog
- If
alarm is triggered, there will be information in
notification center.
- Long
press the power key for 10 seconds triggers force shutdown.
Long press the power key for 3-4 second triggers power options (cancel,
power off, reboot) on screen.
- Support
of App push notification
- Use
webRTC to support non-IE
browser to improve latency
- New
naming rule 'mb'+<release date>+'NVR816' for firmware binary files.
For example: mb20210330NVR816, where 816 means NVR 8 and 16 CH.
Note: Need to upgrade with .txz & .sha512 files first then we support
.zip file upgrade
- Added
Video Analytics page under Setup > Video
Analytics to manage Video analytics database.
Improvements
- For
the first login, users have to set
password (no default password anymore).
- Character
'ä-Ä', 'ö -Ö' and 'ü-Ü' are counted as special characters
which can't be used to set the password. There will be a warning
message pop-up if users use these characters.
- Updated
translations
Bugfixes
- Fisheye
compatibility issues fixed:
- Support
e-PTZ
- Fix
the issue that video type couldn’t be configured
- Under
camera motion setup, time interval configurable range is 1-7200
- Could
display stream1/2 view mode under front-end mode
- Under
Live View > Camera Video Analytics Setup,
object counting doesn’t need to be triggered first to see
detection box for other VAs
- Fixed
NVR's firmware to avoid mask (privacy zone) and VA
zone shift from defined position on new 2MP Move
range cameras.
top
Software Release dl0eL000-20210128 for MOBOTIX MOVE
NVR-8/16
Creation Date: 2021-01-28
Publishing Date: 2021-02-11
Enhancements and Improvements
Modifications to Better Support Remote Installation
- Added
HDD control functions:
- Format
Disk
- Show
Disk
- Smart
info
- Repair
Disk
- Inactivate
- Configurable
network settings
- Configurable
time settings
- Added
PoE management page
- Added
PTZ auto tracking
- User
will be prompted to change the default password upon every login
top
Software Release dl0eL000-20201125 for MOBOTIX MOVE
NVR-8/16
Creation Date: 2020-11-25
Publishing Date: 2021-01-06
Enhancements and Improvements
- Added
support for MOBOTIX MX-232-IO-Box (users could not control camera signal
output via the NVR).
- Added
support for MOBOTIX MOVE SpeedDome auto tracking
feature.
- Added
selection of preferred language when booting for the first time.
- Added
support for German keyboard layout.
Note
All characters on German keyboards are supported except for umlauts (äöüß) in these cases:
- When
entering username/password characters.
- When
entering text for text overlay.
- Added
support for new firmware for MOBOTIX M16 (downward-compatible).
- Added
support for MOBOTIX MOVE NVR I/O board.
- Added
time sync support where remote time format will adjust to local time
format (as set in Setup > System > Date/Time).
Notes
- The
date/time format will not change in the Setup >
System > Date/Time dialog.
- The
day of the week will not change according to the selected language in the
Setup > System > Date/Time dialog.
top
Software Release dl0eL000-20200701 for MOBOTIX MOVE
NVR-8/16
Creation Date: 2020-07-01
Publishing Date: 2020-09-01
This is the first software
for the MOBOTIX MOVE NVR product line.
Copyright
© 1999 – 2022, MOBOTIX AG, Germany, support@mobotix.com