Release Notes for MOBOTIX MOVE
These Release Notes
contain a technical description of the most important changes in the software
for the MOBOTIX MOVE NVR 8/16 channel devices.
Overview of Software Releases
download the stable customer releases of the software from www.mobotix.com in the Support >
Download Center > Software Downloads section.
downloading the software, please extract both files to the same folder.
The device needs both files at the same location in
order to verify the software before starting the installation.
send an email to firstname.lastname@example.org
Release mb20220511NVR816 for MOBOTIX MOVE
Creation Date: 2022-05-11
Publishing Date: 2022-05-19
Mobotix digital signature.
Kernel data code.
ONVIF S/T/G Device (server) test.
password change from remote.
camera FW from remote.
Wisenet camera ONVIF into Move NVR .
Setup> Network> Ethernet, there is new feature "Route" to
arrange routing table priority.
- Note: The port needs to
connect to DHCP server to see the it is shown on
Record > Record Schedule, there are two recording templates.
- Display “About”
on remote web.
After FW Upgrade, the FW version won't be upgraded after refresh. Need
to reboot NVR to refresh FW version.
Couldn’t set RTSL URL under MAC + Chrome.
Remove "Stream Motion Setting" under LBR.
o Note: "Stream Motion
Setting” is no longer exists, but UI hasn’t removed it.
Could do back-end dewarp on playback for
Different login window under MAC + Firefox.
Creation Date: 2022-01-27
Publishing Date: 2022-02-25
PoE-Port DHCP start IP-address for cameras connected to the PoE port
Note 1 : The default IP Start-address is
Note 2 : Camera needs to be configured as DHCP
to receive IP from NVR
- MOBOTIX IoT camera bidirectional audio supported
Central IP camera Password change for a batch of
cameras via local NVR
adding IP camera device by Pull live stream from IP-Camera RTSP
Change password length to be 8-16.
The supported characters are A-Z, a-z, 0-9, !#$%&'-.@^_~
UI improvement - when parameter is saved, there will be "Save
succeeded" text shown on the bottom to indicate changed parameters saved.
UI improvement - under "Add device", user has
to unlock the camera lock symbol first to do any parameter change. After
the parameters are changed and camera locked, there will be pop up window
UI Improvement - under guest mode, users don't need to logout first to
login as admin
“About-Window” additional SW Info available: Display of FW version,
release date, 3rd Party SW-licenses (GPL, GNU…)
UI adjustment - Under live view, adjust character length to avoid text
being blocked when using German
UI adjustment – Setup > Display > Video display mode shall show
Setup > PoE / Ip-Port Management >Advanced “Save” corrected to English
Software Release mb20210902NVR816 for MOBOTIX MOVE
Creation Date: 2021-09-02
Publishing Date: 2021-09-15
- Optimized DDR
configuration to avoid system crash under high loading
load control: if the main
stream is more than 4K resolution and stream 2 is more than D1
resolution, we will have an exclamation mark to inform the user the
resolution is more than recommended value. When mouse hovers over the
mark, a warning message “Camera Resolution is out of range” will be
option for support of camera reboot from UI in “Live
view > Camera system setup" dialog
alarm is triggered, there will be information in
press the power key for 10 seconds triggers force shutdown.
Long press the power key for 3-4 second triggers power options (cancel,
power off, reboot) on screen.
of App push notification
webRTC to support non-IE
browser to improve latency
naming rule 'mb'+<release date>+'NVR816' for firmware binary files.
For example: mb20210330NVR816, where 816 means NVR 8 and 16 CH.
Note: Need to upgrade with .txz & .sha512 files first then we support
.zip file upgrade
Video Analytics page under Setup > Video
Analytics to manage Video analytics database.
the first login, users have to set
password (no default password anymore).
'ä-Ä', 'ö -Ö' and 'ü-Ü' are counted as special characters
which can't be used to set the password. There will be a
warning message pop-up if users use these characters.
compatibility issues fixed:
the issue that video type couldn’t be configured
camera motion setup, time interval configurable range is 1-7200
display stream1/2 view mode under front-end mode
Live View > Camera Video Analytics Setup,
object counting doesn’t need to be triggered first to see
detection box for other VAs
NVR's firmware to avoid mask (privacy zone) and VA
zone shift from defined position on new 2MP Move
Software Release dl0eL000-20210128 for MOBOTIX MOVE
Creation Date: 2021-01-28
Publishing Date: 2021-02-11
Enhancements and Improvements
Modifications to Better Support Remote Installation
HDD control functions:
PoE management page
PTZ auto tracking
will be prompted to change the default password upon every login
Software Release dl0eL000-20201125 for MOBOTIX MOVE
Creation Date: 2020-11-25
Publishing Date: 2021-01-06
Enhancements and Improvements
support for MOBOTIX MX-232-IO-Box (users could not control camera signal
output via the NVR).
support for MOBOTIX MOVE SpeedDome auto tracking
selection of preferred language when booting for the first time.
support for German keyboard layout.
All characters on German keyboards are supported except for umlauts (äöüß) in these cases:
entering username/password characters.
entering text for text overlay.
support for new firmware for MOBOTIX M16 (downward-compatible).
support for MOBOTIX MOVE NVR I/O board.
time sync support where remote time format will adjust to local time
format (as set in Setup > System > Date/Time).
date/time format will not change in the Setup >
System > Date/Time dialog.
day of the week will not change according to the selected language in the
Setup > System > Date/Time dialog.
Software Release dl0eL000-20200701 for MOBOTIX MOVE
Creation Date: 2020-07-01
Publishing Date: 2020-09-01
This is the first software
for the MOBOTIX MOVE NVR product line.
© 1999 – 2022, MOBOTIX AG, Germany, email@example.com