Release Notes for MOBOTIX MOVE
These Release Notes
contain a technical description of the most important changes in the software
for the MOBOTIX MOVE NVR 64 channel device.
Overview of Software Releases
download the stable customer releases of the software from www.mobotix.com in the Support >
Download Center > Software Downloads section.
downloading the software, please extract both files to the same folder. The
device needs both files at the same location in order to verify the
software before starting the installation.
send an email to email@example.com
Release mb20220822NVR64 for MOBOTIX MOVE Mx-S-NVR1A-64-POE24
Creation Date: 2022-08-22
Publishing Date: 2022-08-31
- Read Warning when using Motion Detection
on NVR -
Event reminder will be applied on all the channels, for all the event
types - When there is an event happens since the last time users
acknowledges event, there will be a reminder icon on the top right of the
channel. - If users hover over the icon, there will be text displaying the
latest event type and event time. If user wants to check more events that
have ever happened, he should go to Playback/ Export or Log page to check
further information of that channel. - If users click on the icon, it is
equivalent to acknowledge all the events on that channel. The icon would
disappear after the click. -The behavior for local NVR and remote won't be
synchronized. For example, there is a new user logged in from web remote,
the event reminder would only count the event since his login. User from
local won't be affected by other remote users.
- Move Camera Config upload from remote/
users could decide whether they would like to apply network setting or
not. Be sure to insert a USB flash first.
- Note1 : This feature requires camera FW
(mb20220815 or later) to support.
- Note2: Camera original FW version, model must be exactly
the same to apply the config file
- Note3: Network setting doesn’t include IP address, but other options
like webserver port, RTSP port, etc.
- MOVE Camera Certification file upload from
feature requires camera FW (mb20220815 or later) to support.
- On FW version page, should display the zip
file name so the FW version match the release note
- Option to send a snapshot via E-mail
Note: Ensure that under Setup>System >Event management, snapshot is
- Sending emails only outside of business
times now supported
- Support open VPN (Local NVR only)
Note: Ensure that either LAN/ WAN port needs to be able to reach the VPN
- Under Add Device, the IP cam and ONVIF
represents the username / password that will be applied based on the
filter. IP Cam changed to MOBOTIX MOVE
- Support web.de mail
- Setup > storage> local storage,
"inactivate" changed to "deactivate"
- Move NVR8/16 does not operate sufficient
with MOBOTIX IoT P7 camera range, bad frame rate and visual artifacts
- Time gap issue fixed: Live view showed a
time difference between the NVR and Camera as 10 seconds but there was a 7 minute difference in the playback time display
Software Release mb20220511NVR64 for MOBOTIX MOVE Mx-S-NVR1A-64-POE24
Creation Date: 2022-05-11
Publishing Date: 2022-05-20
- Support Mobotix digital signature.
- Updated Kernel data code.
- PASS ONVIF S/T/G
Device (server) test.
- Make failover/
primary NVR system could be inter-upgradable.
- This feature is
completed by putting chg_logo.chk also in the .zip file.
- Support password
change from remote.
- Upgrade camera
FW from remote.
- Could add Wisenet camera into Move NVR.
- Under Setup>
Network> Ethernet, there is new feature "Route" to arrange
routing table priority.
- Note: The port
needs to connect to DHCP server to see the it is
shown on the list.
- Under Record
> Record Schedule, there are two recording templates.
- No Record
- Note: This is
new feature for passing ONVIF test tool
“About” on remote web.
<![endif]>Support FW upgrade naming rule:[ “mb” + release
date +” NVR “+ number of channels .zip ] for 64CH NVR.
<![endif]>After FW upgrade, the FW version won't be upgraded after refresh. Need
to reboot NVR to refresh FW version.
<![endif]>Couldn’t set RTSL URL under MAC + Chrome.
<![endif]>Remove "Stream Motion Setting" under LBR.
<![if !supportLists]>o <![endif]>Note: "Stream Motion
Setting” is no longer existing, but UI hasn’t removed it.
<![endif]>Could do back-end dewarp on playback for fisheye camera .
<![endif]>See two login window under MAC + Firefox.
Creation Date: 2022-01-27
Publishing Date: 2022-02-25
- MOBOTIX IoT camera bidirectional audio supported
<![endif]>Central IP camera Password change for a batch of
cameras via local NVR
adding IP camera device by Pull live stream from IP-Camera RTSP
<![endif]>Backend NVR De-warping for MOVE Hemispheric Camera in
Note: Feature limited to 64Ch NVR only (not available on 8/16 Ch NVR)
<![endif]>Change password length to be 8-16.
The supported characters are A-Z, a-z, 0-9, !#$%&'-.@^_~
<![endif]>UI improvement - when parameter is saved, there will be "Save
succeeded" text shown on the bottom to indicate changed parameters saved.
<![endif]>UI improvement - under "Add device", user has
to unlock the camera lock symbol first to do any parameter change. After
the parameters are changed and camera locked, there will be pop up window
<![endif]>UI Improvement - under guest mode, users don't need to logout first to
login as admin
“About-Window” additional SW Info available: Display of FW version,
release date, 3rd Party SW-licenses (GPL, GNU…)
<![endif]>UI adjustment - Under live view, adjust character length to avoid text
being blocked when using German
<![endif]>UI adjustment – Setup > Display > Video display mode shall show
Setup > PoE / Ip-Port Management >Advanced “Save” corrected to English
© 1999 – 2022, MOBOTIX AG, Germany, firstname.lastname@example.org