Release Notes for MOBOTIX MOVE Mx-S-NVR1A-8/16-POE
These Release Notes
contain a technical description of the most important changes in the software
for the MOBOTIX MOVE NVR 8/16 channel devices.
Overview of Software Releases
- Please download the stable customer releases of the software from www.mobotix.com in the Support >
Download Center > Software Downloads section.
downloading the software, please extract both files to the same folder.
The device needs both files at the same location in
order to verify the software before starting the installation.
send an email to email@example.com
to improved MOVE IP cameras forced Password change security policy, for
new installed cameras (“out of the box”), it is mandatory to change Camera
Standard Password on camera using direct camera Web-access via Browser , to allow integration and access via NVR.
Standard Password on camera will not be accepted and supported by the NVR
Software Release mb20221101NVR816 for MOBOTIX MOVE Mx-S-NVR1A-8/16-POE
Creation Date: 2022-11-01
Publishing Date: 2022-12-08
<![endif]>Add event push message service (NVR/Remote)
VA event is
supported now, and there’s a switch to decide if you want to send the event or
<![endif]>Add white / black list
service for Face Recognition & LPR
MOBOTIX MOVE camera
can support white/black list in FR & LPR
<![endif]>Add bypass camera Face Recognition & LPR Service
Bypass mode can
support MOBOTIX MOVE camera now
<![endif]>Modify the event log search service
In log pages, user
can choose the filter to search the event
<![endif]>Support Face Recognition / ALPR Database Edit service
User now can do the
edit to the database for Face Recognition and LPR
<![endif]>MOBOTIX PTZ keyboard integration
<![endif]>Support Video analytics setting from remote
<![endif]>Support edge recording from remote
<![endif]>Setup> System> Event management, for video
analytics, support In list/ white list/ black list/
Not in list
<![endif]>MOBOTIX MOVE ALPR camera integration
<![endif]>Support ONVIF PTZ
The FW with PTZ
function pass ONVIF support testing.
<![endif]>Disable google drive service (Google policy)
<![endif]>Fix ONVIF Pelco Camera Decode Problem (Pelco Camera
Software Release mb20220822NVR816 for MOBOTIX MOVE Mx-S-NVR1A-8/16-POE
Creation Date: 2022-08-22
Publishing Date: 2022-08-31
Warning when using Motion Detection on NVR -
Event reminder will be applied on all the channels, for all the event
types - When there is an event happens since the last time users
acknowledges event, there will be a reminder icon on the top right of the
channel. - If users hover over the icon, there will be text displaying the
latest event type and event time. If user wants to check more events that
have ever happened, he should go to Playback/ Export or Log page to check
further information of that channel. - If users click on the icon, it is
equivalent to acknowledge all the events on that channel. The icon would
disappear after the click. -The behavior for local NVR and remote won't be
synchronized. For example, there is a new user logged in from web remote,
the event reminder would only count the event since his login. User from
local won't be affected by other remote users.
Camera Config upload from remote/ local,
users could decide whether they would like to apply network setting or
not. Be sure to insert a USB flash first.
Note1 : This feature requires camera FW
(mb20220815 or later) to support.
Note2: Camera original FW version, model has to be exactly the same to
apply the config file
Note3: Network setting doesn’t includes IP
address, but other options like webserver port, RTSP port, etc.
Camera Certification file upload from remote/ local
Note: This feature requires
camera FW (mb20220815 or later) to support.
- On FW
version page, should display the zip file name so the FW version match the
- Option to
send a snapshot via Email
Note: Ensure that under Setup>System >Event management, snapshot is
- Sending emails
only outside of business times now supported
open VPN (Local NVR only)
Note: Ensure that either LAN/ WAN port needs to be able to reach the VPN
- Under Add
Device, the IP cam and ONVIF represents the username/ password that will
be applied based on the filter. IP cam change to
- Setup >
storage> local storage, "inactivate" changed to
NVR8/16 does not operate sufficient with MOBOTIX IoT P7 camera range, bad
frame rate and visual artifacts fixed
- Time gap
issue fixed: Live view showed a time difference between the NVR and Camera
as 10 seconds but there was a 7 minute difference
in the playback time display
Release mb20220511NVR816 for MOBOTIX MOVE
Creation Date: 2022-05-11
Publishing Date: 2022-05-20
Mobotix digital signature.
Kernel data code.
ONVIF S/T/G Device (server) test.
failover/ primary NVR system could be inter upgradable.
feature is completed by putting chg_logo.chk also in the .zip file.
password change from remote.
camera FW from remote.
add Wisenet camera into Move NVR .
Setup> Network> Ethernet, there is new feature "Route" to
arrange routing table priority.
- Note: The port needs to
connect to DHCP server to see the it is shown on
Record > Record Schedule, there are two recording templates.
- No Record
- Note: This is new
feature for passing ONVIF test tool.
- Display “About”
on remote web.
<![endif]>After FW Upgrade, the FW version won't be upgraded after refresh. Need
to reboot NVR to refresh FW version.
<![endif]>Couldn’t set RTSL URL under MAC + Chrome.
<![endif]>Remove "Stream Motion Setting" under LBR.
<![if !supportLists]>o <![endif]>Note: "Stream Motion
Setting” is no longer exists, but UI hasn’t removed it.
<![endif]>Could do back-end dewarp on playback for fisheye camera.
<![endif]>See two login window under MAC + Firefox.
Creation Date: 2022-01-27
Publishing Date: 2022-02-25
PoE-Port DHCP start IP-address for cameras connected to the PoE port
Note 1 : The default IP Start-address is
Note 2 : Camera needs to be configured as DHCP
to receive IP from NVR
- MOBOTIX IoT camera bidirectional audio supported
<![endif]>Central IP camera Password change for a batch of
cameras via local NVR
adding IP camera device by Pull live stream from IP-Camera RTSP
<![endif]>Change password length to be 8-16.
The supported characters are A-Z, a-z, 0-9, !#$%&'-.@^_~
<![endif]>UI improvement - when parameter is saved, there will be "Save
succeeded" text shown on the bottom to indicate changed parameters saved.
<![endif]>UI improvement - under "Add device", user has
to unlock the camera lock symbol first to do any parameter change. After
the parameters are changed and camera locked, there will be pop up window
<![endif]>UI Improvement - under guest mode, users don't need to logout first to
login as admin
“About-Window” additional SW Info available: Display of FW version,
release date, 3rd Party SW-licenses (GPL, GNU…)
<![endif]>UI adjustment - Under live view, adjust character length to avoid text
being blocked when using German
<![endif]>UI adjustment – Setup > Display > Video display mode shall show
Setup > PoE / Ip-Port Management >Advanced “Save” corrected to English
Software Release mb20210902NVR816 for MOBOTIX MOVE
Creation Date: 2021-09-02
Publishing Date: 2021-09-15
- Optimized DDR
configuration to avoid system crash under high loading
load control: if the main
stream is more than 4K resolution and stream 2 is more than D1
resolution, we will have an exclamation mark to inform the user the
resolution is more than recommended value. When mouse hovers over the
mark, a warning message “Camera Resolution is out of range” will be
option for support of camera reboot from UI in “Live
view > Camera system setup" dialog
alarm is triggered, there will be information in
press the power key for 10 seconds triggers force shutdown.
Long press the power key for 3-4 second triggers power options (cancel,
power off, reboot) on screen.
of App push notification
webRTC to support non-IE browser to improve latency
naming rule 'mb'+<release date>+'NVR816' for firmware binary files.
For example: mb20210330NVR816, where 816 means NVR 8 and 16 CH.
Note: Need to upgrade with .txz
& .sha512 files first then we support .zip file upgrade
Video Analytics page under Setup > Video
Analytics to manage Video analytics database.
the first login, users have to set
password (no default password anymore).
'ä-Ä', 'ö -Ö' and 'ü-Ü' are counted as special characters
which can't be used to set the password. There will be a
warning message pop-up if users use these characters.
compatibility issues fixed:
the issue that video type couldn’t be configured
camera motion setup, time interval configurable range is 1-7200
display stream1/2 view mode under front-end mode
Live View > Camera Video Analytics Setup,
object counting doesn’t need to be triggered first to see
detection box for other VAs
NVR's firmware to avoid mask (privacy zone) and VA
zone shift from defined position on new 2MP Move
Software Release dl0eL000-20210128 for MOBOTIX MOVE
Creation Date: 2021-01-28
Publishing Date: 2021-02-11
Enhancements and Improvements
Modifications to Better Support Remote Installation
HDD control functions:
PoE management page
PTZ auto tracking
will be prompted to change the default password upon every login
Software Release dl0eL000-20201125 for MOBOTIX MOVE
Creation Date: 2020-11-25
Publishing Date: 2021-01-06
Enhancements and Improvements
support for MOBOTIX MX-232-IO-Box (users could not control camera signal
output via the NVR).
support for MOBOTIX MOVE SpeedDome auto tracking feature.
selection of preferred language when booting for the first time.
support for German keyboard layout.
All characters on German keyboards are supported except for umlauts (äöüß) in
entering username/password characters.
entering text for text overlay.
support for new firmware for MOBOTIX M16 (downward-compatible).
support for MOBOTIX MOVE NVR I/O board.
time sync support where remote time format will adjust to local time
format (as set in Setup > System > Date/Time).
date/time format will not change in the Setup >
System > Date/Time dialog.
day of the week will not change according to the selected language in the
Setup > System > Date/Time dialog.
Software Release dl0eL000-20200701 for MOBOTIX MOVE
Creation Date: 2020-07-01
Publishing Date: 2020-09-01
This is the first software
for the MOBOTIX MOVE NVR product line.
© 1999 – 2022, MOBOTIX AG, Germany, firstname.lastname@example.org