Release Notes for
MOBOTIX MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR, Mx-VT1A-203-IR,
Mx-VT1A-503-IR Camera Software
Document Information
|
Publisher:
|
MOBOTIX AG
|
|
Author:
|
Thomas
Dieregsweiler
|
|
Date:
|
2025-10-01
|
|
Document:
|
release-notes
mb20250912TU en v1-1.html
|
|
Confidentiality:
|
public
|
Contents
These Release Notes contain a technical description of the most
important changes in the software for the MOBOTIX MOVE Turret Mx-VT1A-xxx
cameras.
Overview of the Software Releases
Notes:
- Cameras
do support fixed IP setting and automized DHCP IP configuration. If there
is no DHCP Server available in Network environment, the camera
automatically sets a unique IP Address according to individual MAC Address
rules without additional configuration. This IP range is defined in
10.xxx.xxx.xxx Network range as is printed on each individual Camera
Product label.
- Please download the stable customer releases of the
software from www.mobotix.com in the Support >
Download Center > Software Downloads section.
- Please send an email to support@mobotix.com for feedback.
Important:
- For
all the FW versions dated before mb20241101TU please update first
to bridge firmware mb20240710TU_bridge.dat and then update to the
latest on web FW version.
- These MOBOTIX MOVE Turret cameras had been designed for
general purpose and broad integration in MOBOTIX and 3rd Party
Software and recording Solutions by using general purpose ONVIF
S/G/T&M integration and interoperability profiles. When integrating
these cameras in MOBOTIX Environments (i.e. MOVE NVR, MOVE CMS, MOBOTIX
HUB /MxMC, MOBOTIX Cloud…) or other 3rd party SW please use
ONVIF device search and Integration method only.
top
Software Release mb20250912TU for MOBOTIX
MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR, Mx-VT1A-203-IR, Mx-VT1A-503-IR
Creation Date: 2025-09-12
Publishing Date: 2025-10-01
Enhancements and Improvements
Bugfixes
- Fixed
missing translation for table header on event search page
- Fixed
SOE problem with Genetec
- Fixed
NTP synchronization from the DHCP server.
- Fixed
Reference Border Line cannot work normally when orientation is set to
“both”
- Fixed
the Focus Control Issue where the Near and Far functions were reversed
when controlled manually via ONVIF.
top
Software Release mb20250620TU for MOBOTIX
MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR, Mx-VT1A-203-IR, Mx-VT1A-503-IR
Creation Date: 2025-06-20
Publishing Date: 2025-06-27
Enhancements and Improvements
- Removed
unnecessary model files to shrink FW size
Bugfixes
- Fixed
the mouse point error when drawing polygons after resizing the window or
zooming
- Extended
event ftp port setting range when use camset cgi
- Fixed
when user download selected SD card files, camera will miss some files
- Fixed
reference between VA features cannot work normally in some scenario
- Fixed
pop-up the unsaved changes message when no change on LDAP page
top
Software Release mb20250311TU for MOBOTIX
MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR, Mx-VT1A-203-IR, Mx-VT1A-503-IR
Creation Date: 2025-03-11
Publishing Date: 2025-03-11
Enhancements and Improvements
- Increased
Character numbers in OSD Text single line.
- Improved
the Analytics PVD performance of 5M models
- Updated
stream table of 2M models
- Set
RTSP Authentication to Default: ON
Bugfixes
- Fix
issue regarding network recording to SD
- Reconnect
websocket after clicked download system log to avoid status not shown
(Firmware update status)
- Fixed
login error with SFTP
- Fixed
line counting reset issue (Object Counting)
- Fixed
unable to successfully connect to the HTTPS port when change HTTP and
HTTPS port setting at the same time
- Fixed
H.265 stream issue when connected to NVR
top
Software Release mb20241101TU for MOBOTIX
MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR, Mx-VT1A-203-IR, Mx-VT1A-503-IR
Creation Date: 2024-11-01
Publishing Date: 2024-11-29
Enhancements and Improvements
- Enhanced
image quality
- Added
a default/reboot combo function to the default button: it will reset if
pressed for 1 to 4 seconds; pressing for 5 seconds or more will set it to
default
Bugfixes
- Fixed
the event cannot send mail to the correct user if one of the user’s email
is empty
- Fixed
VA line 3 arrow disappearance issue.
- Fixed
the motion detection fails when the zone is drawn exactly on the edge or
over the edge of live view
- Fixed
the latest recording file cannot be obtained after rebooting issue during
continuous recording
- Fixed
the issue where changing the encode settings may cause the snapshot
function on the live view page to fail
- Fix
the HTTP Generic event cannot be saved issue
top
Software Release mb20240829TU for MOBOTIX
MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR, Mx-VT1A-203-IR, Mx-VT1A-503-IR
Creation Date: 2024-08-29
Publishing Date: 2024-09-13
Enhancements and Improvements
- Enhanced
zoom/focus performance
- Enhanced
PVD accuracy
- Adjusted
the quality level range settings for the ONVIF Test Tool (OTT)
- Added
the display of the RTMP page in the web UI and validated its functionality
- Renewed
default password mechanism when the device is restored to factory settings
Bugfixes
- Fixed
SD card recording not functioning
- Fixed
the issue of image freeze was caused by the video analytics
top
Software Release mb20240510TU for MOBOTIX
MOVE Camera Models Mx-VT1A-2-IR, Mx-VT1A-5-IR, Mx-VT1A-203-IR, Mx-VT1A-503-IR
Creation Date: 2024-05-10
Publishing Date: 2024-06-01
Enhancements and Improvements
- Added
support for the DNN-Anaylics Object-filter that can filter for People,
Vehicles, or Both
- Added
German GUI translation corrections
- Enhanced
the speed of Zoom, Focus, and Auto-focus
- Implemented
a mechanism that ensures that the live view does not turn black while the
lens Zoom / Focus is moving
Bugfixes
- Fixed
the timing issue with the zoom control when the camera is connected via
ONVIF
- Resolved
the integration issue that occurred after changing the codec to JPG in the
Milestone Management Client, which resulted in the live view does not
display in the Smart Client
- Fixed
the issue of SD card recording not functioning has been resolved, which
was impacting both the edge and the Milestone restore clips
top
Software Release mb20240314TU for MOBOTIX MOVE Camera
Models Mx-VT1A-2-IR, Mx-VT1A-5-IR, Mx-VT1A-203-IR, Mx-VT1A-503-IR
Creation Date: 2024-03-14
Publishing Date: 2024-03-15
Enhancements and Improvements
- Optimized
zoom in/out functionalities in MOBOTIX MOVE NVR
- Modified
the default codec setting of stream 2 from MJPEG to H.264
- Implemented
dynamical generation of tab title by product name
- Added
full-screen on live page
- Improved
Zoom/Focus move speed
- Refined
encode start/restart process to speed up WDR switch
- Added
support for GNU/GPL License pop-window
- Implemented
mechanism on the web page so that the live stream will automatically use
H.264 as the default codec and adjust the resolution to the highest
resolution
- Added
support for classifying objects as Human or Vehicle
- Implemented
GUI translation (DE) corrections
Bugfixes
- Fixed
when user disables "Accept IPv6 router advertisements" and
"Enable DHCPv6", dhcpv6 still connected from the web page
- Fixed
the callback of HTTPS specify port error
- Fixed
user can't set the original multicast address bug issue
- Fixed
wrong event type name on events page
- Fixed
height of event list bug on events page
- Fixed
multicast audio address bug
- Fixed
h264 websocket can't req i-frame bug when switching tab
- Fixed
freeze issue by adding a mechanism of reconnecting h264 websocket to avoid
freeze
- Fixed
issue that when user synchronize with NTP Server from DHCP server,
synchronize time may fail
- Fixed
the continuous movement of zoom/focus is not functioning as expected
- Fixed
the issue where the 5MP camera would not trigger when the detection type
was set to PVD
- Fixed
the issue that switching between detection modes in PVD and MD multiple
times can cause PVD to stop functioning
Copyright
© 1999 – 2025, MOBOTIX AG, Germany, support@mobotix.com