Release Notes for MOBOTIX
MOVE NVR-8/16 Models
Document Information
|
Publisher:
|
MOBOTIX AG
|
|
Author:
|
Thomas
Dieregsweiler
|
|
Date:
|
2025-10-24
|
|
Document:
|
release-notes_mb20251017NVR816_en_v1-1.html
|
|
Confidentiality:
|
Public
|
Contents
These Release Notes contain a technical description of the most
important changes in the software for the MOBOTIX MOVE NVR 8/16 channel
devices.
Overview of Software Releases
Notes:
- Please download the stable customer releases of the
software from www.mobotix.com in the
Support > Download Center > Software Downloads
section.
- After downloading the software, please extract both
files to the same folder. The device needs both files at the same location
in order to verify the software before starting the installation.
- Please send an email to support@mobotix.com for feedback.
Hints
- Compatible camera FW: Minimum camera FW version to support config upgrade: mb20220712UX
top
Software Release mb20251017NVR816 for MOBOTIX MOVE Mx-S-NVR1A-8/16-POE,
Mx-S-NVR1B-8/16-POE
Creation Date: 2025-10-17
Publishing Date: 2025-10-24
New Features
·
Add Camera time sync function when adding a new
channel
·
If camera time sync is enabled, perform a
one-time time synchronization on startup.
·
Enabled web browser access of IP cameras via NVR
·
Added VA (Video Analytics) options in NVR remote
web interface
·
Added port forwarding service for remote web
access
·
Added ONVIF Camera FW upgrade service (support
on 3rd Party camera required)
·
Added manual database sync service for new VA
cameras
·
Added SNMP agent service
·
Enabled the camera Face Recognition / LPR
settings via NVR
·
Enabled remote reboot functionality.
·
NVR QR code display for Integrations (Connect
APP) is now supported on the remote interface.
·
Added "Partial Default" NVR Restore
function.
(Keeps network-related settings such as IP
address, gateway, and DNS unchanged.)
Improvements
·
Removed the slider control from the playback
panel to improve UI consistency.
(The control was removed because the
existing buttons above already fully cover the
functionalities provided by the slider.)
·
Enhanced fast forward playback with full frame
decoding.
(For 2x/4x forward modes, ensuring smoother
and more continuous visual playback, closer to natural fast-motion viewing.)
·
Changed terminology in the Setup & Log page:
“Blacklist/Whitelist”→“Blocklist/Allowlist.”
·
Added necessary confirmation windows along
Parameter Changes.
(Added confirmation dialogs for remote
storage activation/deactivation operations.
Unified confirmation wording across the
UI.)
·
Changed the default account from Admin to
admin.()
Bugfixes
·
Fix the camera privacy mask misplacement issue
when configuring via NVR
·
Fixed PTZ Control issue (NVR Menu / Bar)
·
Fixed the issue where VA events were not
triggered properly
·
Resolved an issue where push notifications were
not triggered in the MOVE Connect / NVR app when motion detection
·
Resolved an issue where motion detection events
failed to send MOVE Connect / NVR app notifications and were only displayed in
the Event Playback section
·
top
Software Release
mb20250110NVR816 for MOBOTIX MOVE Mx-S-NVR1A-8/16-POE,
Mx-S-NVR1B-8/16-POE
Creation Date: 2025-01-10
Publishing Date: 2025-03-06
New Features
·
Added a note about streaming protocols
(locally): RTP+RTSP (UDP) and RTP/RTSP (TCP).
Improvements
· None
Bugfixes
·
Fixed the issue where video files cannot be
exported due to different recording formats at the same time (locally)
Hints
- Compatible camera FW: Minimum camera FW version to support config upgrade: mb20220712UX
top
Software Release mb20241118 NVR816 for MOBOTIX MOVE
Mx-S-NVR1A-8/16-POE, Mx-S-NVR1B-8/16-POE
Creation
Date: 2024-11-18
Publishing
Date: 2024-11-29
New Features
·
Hostname of the NVR can be changed
Improvements
· None
Bugfixes
·
None
Hints
- Compatible camera FW: Minimum camera FW
version to support config upgrade: mb20220712UX
top
Software Release mb20240624 NVR816 for MOBOTIX MOVE
Mx-S-NVR1A-8/16-POE, Mx-S-NVR1B-8/16-POE
Creation
Date: 2024-06-24
Publishing
Date: 2024-08-14
New Features
·
None
Improvements
- Sync camera connection password
settings automatically after the user modifies the password
- Adjust device search conditions to
filter for ''MOBOTIX MOVE''
- Applied ''Device'' authority settings
for the ''Web Page'' option
- Change motion settings to correspond
with multi-sensor camera streaming
- Support for the Polish language
- In the "add device" page,
change the text "Mobotix move" to "Mobotix" in the
device filter
Bugfixes
- Fixed the bug where text is incorrectly
translated into Japanese in Japanese language
- Fixed the Live page camera setup bug
for third-party ONVIF cameras (local only)
- Fixed the bug that prevents detection
of two USB devices simultaneously
- Fixed the Mobotix USB keyboard (with
ptz joystick & jog shuttle) detection problem (local only)
Hints
- Compatible camera FW: Minimum camera FW
version to support config upgrade: mb20220712UX
top
Software Release mb20240429 NVR816 for MOBOTIX MOVE
Mx-S-NVR1A-8/16-POE, Mx-S-NVR1B-8/16-POE
Creation
Date: 2024-04-29
Publishing
Date: 2024-06-01
New Features
·
None
Improvements
- Implemented a mechanism to sync camera
connection password settings automatically after the user modifies the
password
- Adjusted device search “Add Device”
conditions to filter for ''MOBOTIX MOVE''
- Applied ''Device'' authority settings
for the ''Web Page'' option
Bugfixes
- Changed motion/mask settings to
correspond with multi-sensor camera streaming
Hints
- Compatible camera FW: Minimum camera FW
version to support config upgrade: mb20220712UX
top
Software
Release mb20240301NVR816 for MOBOTIX MOVE Mx-S-NVR1A-8/16-POE
Creation
Date: 2024-03-01
Publishing
Date: 2024-03-15
New Features
- Instant playback which allows user to
select single channel playback at live page
Improvements
- Optimize features for multi-sensor
models: present all screens captured by the machine in groups &
automatically capture sub streams.
- Modify the web page refresh rendering
service.
- Enable the WebViewer for camera.
Bugfixes
- Fix the popup window bug.
- Fixed the rtsp_server bug.
- Fixed Axis encoder connect issue.
- Fixed Axis camera connect Onvif issue.
- Fixed https setting bug after import
config file.
Hints
- Compatible camera FW: Minimum camera FW
version to support config upgrade: mb20220712UX
top
Software Release mb20231013NVR816 for MOBOTIX MOVE
Mx-S-NVR1A-8/16-POE
Creation Date: 2023-10-13
Publishing Date: 2023-10-23
New
Features
- Added
Pop Up messages while leaving the add device page in case the camera is
not connected correct yet.
- Added
forget password function (requires latest MOVE NVR APP update)
- Added
user password setup hint and “modify Password” for connected cameras via
NVR remote Browser
Improvements
- Modified
description text for WAN port DHCP server
- Added
hint text when credential is wrong
- Support
MOVE Multi-sensor camera connection
- Modified
the GUI wording in add device
- Implemented
support for the Axis Encoder
- Implemented
modification for the Export Schedule
Bugfixes
- Fixed time zone crash issue in combination with CMS Software
Hints
top
Software Release mb20230301NVR816 for MOBOTIX MOVE
Mx-S-NVR1A-8/16-POE
Creation Date: 2023-03-01
Publishing Date: 2023-03-23
New
Features
- Add the
ONVIF camera time sync service
- Add
camera time sync setup service
Improvements
- Mobotix PTZ keyboard integration
- HTTP Event Notify Server Refine
- Update the notification/Warning Image icon
- Modified VA data path for Windows Edition
- Modified GUI IR Gain Option Layout
- Enabled HTTPS port change service
- Support of the PTZ keyboard controller left/right hand mode
Bugfixes
- Fixed
PTZ control in left hand side
- Fixed
multiple NAS device at system bug
- Fixed some text translation error
- Fixed the bug about the event zone drawing service
- Fixed the event snapshot problem in Notify Center
top
Software Release mb20221101NVR816 for MOBOTIX MOVE
Mx-S-NVR1A-8/16-POE
Creation Date: 2022-11-01
Publishing Date: 2022-11-04
New
Features
- Support Vaxtor
Camera LPR Event
- Add event push
message service (NVR/Remote)
- Add white/black list servce for Face_R & LPR
- Add bypass camera Face Recognition & LPR Service
- Add event notify network service
- V2 Camera Event triggered by metadata stream
- Enable Edge option setup service (Remote)
- Modified the event log search service
- Add Videotec Joystick Support
- Support Onvif PTZ Service
- Support Face Recognition/LPR Database Edit service
(NVR/Remote)
- Disable google drive service (Google policy)
- Videotec keyboard integration
- Please connect Keyboard with NVR, then reboot to detect
new device.
- Once the keyboard is detected, you will see keyboard model
name Videotec DCZ 1 shown on the Joysticks page. The whole page will
become grayed out
- Support Video analytics setting from remote
- Support edge recording from remote
- Setup> System> Event management, for video analytics,
support In list/ white list/ black list/ Not in list
- The definition of bypass/ Normal could refer to our
proposal about vaxtor in
- From this version, video analytics action will depend on
the list. Whenever there is subject enter zones, action will be triggered
depending on the action defined by list. Let’s say Vera is in the
blacklist. As long as Vera enters any of the zones, then she will trigger
action linked to the blacklist. Same list setting is applied for all of
the cameras.
- Vaxtor integration
- No need to configure camera setting from NVR side
- On Liveview page, no
additional options for configuring LPR setting
- NVR could
receive Vaxtor events
- There will be notification
in the message center
- NVR could configure corresponding actions for Vaxtor
events
- User could configure the corresponding event when LPR
event is triggered
- Specially note that now the user could decide the action
based on the list:
- Normal: It means NVR will judge whether there is event or
not by cross checking the detected license plate with the list inside
NVR
- Bypass: It means camera will judge whether there is event
or not by cross checking the detected license plate with the list inside
camera
- Specially note that there are 4 types of list:
- White list
- Black list
- In list: whatever inside the database
- Not In list: whatever not inside the database
- To receive Vaxtor event, user need to configure the
listen port in NVR. There is a new tap under Setup> Network> Event
receiver. User could decide whether they want to enable https /
authorization feature
- Camera will need to include new message template to send
correct info to NVR. DC will provide info for camera FW revision
- Users could receive below info from camera
- Information will be displayed under Log> VA detected
event> Info
- Now all the info will be put into one column.
- User could export information by using below filter
condition:
- Duration
- Number plate
- CH number
- The exported file format is CSV
- FW version on the OTT test report will be in the same
format as Mobotix style mb+date code+NVR model. EX: mb20221019NVR816
Improvements
Bugfixes
top
Software Release mb20220822NVR816 for MOBOTIX MOVE Mx-S-NVR1A-8/16-POE
Creation Date: 2022-08-22
Publishing Date: 2022-08-31
New
Features
- Read Warning when using Motion Detection on NVR -
Event reminder will be applied on all the channels, for all the event
types - When there is an event happens since the last time users
acknowledges event, there will be a reminder icon on the top right of the
channel. - If users hover over the icon, there will be text displaying the
latest event type and event time. If user wants to check more events that
have ever happened, he should go to Playback/ Export or Log page to check
further information of that channel. - If users click on the icon, it is
equivalent to acknowledge all the events on that channel. The icon would
disappear after the click. -The behavior for local NVR and remote won't be
synchronized. For example, there is a new user logged in from web remote,
the event reminder would only count the event since his login. User from
local won't be affected by other remote users.
- Move Camera Config upload from remote/ local,
users could decide whether they would like to apply network setting or
not. Be sure to insert a USB flash first.
Note1 : This feature requires camera FW (mb20220815 or later) to support.
Note2: Camera original FW version, model has to be exactly the same to
apply the config file
Note3: Network setting doesn’t includes IP address, but other options like
webserver port, RTSP port, etc.
- MOVE Camera Certification file upload from remote/ local
Note: This feature requires camera FW (mb20220815 or later) to
support.
- On FW version page, should display the zip file name so the
FW version match the release note
- Option to send a snapshot via Email
Note: Ensure that under Setup>System >Event management, snapshot is
selected
- Sending emails only outside of business times now supported
- Support open VPN (Local NVR only)
Note: Ensure that either LAN/ WAN port needs to be able to reach the VPN
server
- Under Add Device, the IP cam and ONVIF represents the
username/ password that will be applied based on the filter. IP cam change
to MOBOTIX MOVE
- Web.de Mail supported
Improvements
- Setup > storage> local storage,
"inactivate" changed to "deactivate"
Bugfixes
- Move NVR8/16 does not operate sufficient with MOBOTIX IoT
P7 camera range, bad frame rate and visual artifacts fixed
- Time gap issue fixed: Live view showed a time difference
between the NVR and Camera as 10 seconds but there was a 7 minute
difference in the playback time display
top
Software Release mb20220511NVR816
for MOBOTIX MOVE Mx-S-NVR1A-8/16-POE
Creation Date: 2022-05-11
Publishing Date: 2022-05-20
New Features
- Support Mobotix digital signature.
- Update Kernel data code.
- PASS ONVIF S/T/G Device (server) test.
- Make failover/ primary NVR system could be inter
upgradable.
- This feature is completed by putting chg_logo.chk also
in the .zip file.
- Support password change from remote.
- Upgrade camera FW from remote.
- Could add Wisenet camera into Move NVR .
- Under Setup> Network> Ethernet, there is new
feature "Route" to arrange routing table priority.
- Note: The port needs to connect to DHCP server to see the it is
shown on the list.
- Under Record > Record Schedule, there are two
recording templates.
- Record
- No Record
- Note: This is new feature for passing ONVIF test tool.
- Display “About” on remote web.
Improvements
Bugfixes
·
After FW
Upgrade, the FW version won't be upgraded after refresh. Need to reboot NVR to
refresh FW version.
·
Couldn’t set
RTSL URL under MAC + Chrome.
·
Remove
"Stream Motion Setting" under LBR.
o
Note:
"Stream Motion Setting” is no longer exists, but UI hasn’t removed it.
·
Could do
back-end dewarp on playback for fisheye camera.
·
See two login
window under MAC + Firefox.
top
Software Release mb20220127NVR816 for
MOBOTIX MOVE Mx-S-NVR1A-8/16-POE
Creation Date: 2022-01-27
Publishing Date: 2022-02-25
New Features
- User-definable PoE-Port DHCP start IP-address for cameras
connected to the PoE port directly
Note 1 : The default IP Start-address is 192.168.51.2
Note 2 : Camera needs to be configured as
DHCP to receive IP from NVR
- MOBOTIX
IoT camera bidirectional audio supported (P6/P7)
·
Central
IP camera Password change for a batch of cameras via local NVR
·
Support adding IP camera device by Pull live stream from IP-Camera
RTSP URL
·
Change
password length to be 8-16.
The supported characters are A-Z, a-z,
0-9, !#$%&'-.@^_~
Improvements
·
UI
improvement - when parameter is saved, there will be "Save succeeded"
text shown on the bottom to indicate changed parameters saved.
·
UI
improvement - under "Add device", user has to unlock the camera lock
symbol first to do any parameter change. After the parameters are changed and
camera locked, there will be pop up window "Save succeeded"
·
UI
Improvement - under guest mode, users don't need to logout first to login as
admin
·
In “About-Window” additional SW Info available: Display of FW version, release date, 3rd Party
SW-licenses (GPL, GNU…)
Bugfixes
·
UI adjustment
- Under live view, adjust character length to avoid text being blocked when
using German
·
UI adjustment
– Setup > Display > Video display mode shall show English
Setup > PoE / Ip-Port Management >Advanced “Save” corrected to English
top
Software Release mb20210902NVR816 for
MOBOTIX MOVE Mx-S-NVR1A-8/16-POE
Creation Date: 2021-09-02
Publishing Date: 2021-09-15
New Features
- Optimized DDR
configuration to avoid system crash under high loading
- Streaming load control: if the main stream is
more than 4K resolution and stream 2 is more than D1 resolution, we will
have an exclamation mark to inform the user the resolution is more than
recommended value. When mouse hovers over the mark, a warning message
“Camera Resolution is out of range” will be displayed
- New option for support of camera reboot from UI
in “Live view > Camera system setup"
dialog
- If alarm is triggered, there will be
information in notification center.
- Long press the power key for 10 seconds triggers force shutdown.
Long press the power key for 3-4 second triggers power options (cancel,
power off, reboot) on screen.
- Support of App push notification
- Use webRTC to support non-IE browser
to improve latency
- New naming rule 'mb'+<release date>+'NVR816' for
firmware binary files. For example: mb20210330NVR816, where 816 means NVR
8 and 16 CH.
Note: Need to upgrade with .txz & .sha512 files first
then we support .zip file upgrade
- Added Video Analytics page under Setup
> Video Analytics to manage Video analytics database.
Improvements
- For the first login, users have to set password
(no default password anymore).
- Character 'ä-Ä', 'ö -Ö' and 'ü-Ü' are counted as
special characters which can't be used to set the password.
There will be a warning message pop-up if users use these characters.
- Updated translations
Bugfixes
- Fisheye compatibility
issues
fixed:
- Support e-PTZ
- Fix the issue that video type couldn’t be configured
- Under camera motion setup, time interval configurable
range is 1-7200
- Could display stream1/2 view mode under front-end mode
- Under Live View > Camera
Video Analytics Setup, object counting doesn’t
need to be triggered first to see detection box for other VAs
- Fixed NVR's firmware to avoid mask
(privacy zone) and VA zone shift from
defined position on new 2MP Move range cameras.
top
Software Release dl0eL000-20210128 for
MOBOTIX MOVE NVR-8/16
Creation Date: 2021-01-28
Publishing Date: 2021-02-11
Enhancements and Improvements
Modifications to Better Support Remote
Installation
- Added HDD control functions:
- Format Disk
- Show Disk
- Smart info
- Repair Disk
- Inactivate
- Configurable network settings
- Configurable time settings
- Added PoE management page
- Added PTZ auto tracking
- User will be prompted to change the default password
upon every login
top
Software Release dl0eL000-20201125 for
MOBOTIX MOVE NVR-8/16
Creation Date: 2020-11-25
Publishing Date: 2021-01-06
Enhancements and Improvements
- Added support for MOBOTIX MX-232-IO-Box (users could
not control camera signal output via the NVR).
- Added support for MOBOTIX MOVE SpeedDome auto tracking
feature.
- Added selection of preferred language when booting for
the first time.
- Added support for German keyboard layout.
Note
All characters on German keyboards are supported except for umlauts (äöüß) in
these cases:
- When entering username/password characters.
- When entering text for text overlay.
- Added support for new firmware for MOBOTIX M16
(downward-compatible).
- Added support for MOBOTIX MOVE NVR I/O board.
- Added time sync support where remote time format will
adjust to local time format (as set in Setup > System >
Date/Time).
Notes
- The date/time format will not change in the Setup >
System > Date/Time dialog.
- The day of the week will not change according to the
selected language in the Setup > System > Date/Time
dialog.
top
Software Release dl0eL000-20200701 for
MOBOTIX MOVE NVR-8/16
Creation Date: 2020-07-01
Publishing Date: 2020-09-01
This is the first software for the MOBOTIX MOVE NVR product line.
Copyright
© 1999 – 2025, MOBOTIX AG, Germany, support@mobotix.com