Start / Supporto / User Forum / Installation - Network / ExtIO installation

Navigation

ExtIO installation

Previous topic

Installation - Network

Next topic

You need to be logged in to get access to the forums. You can do so here.

Author	Message
KH081013 Mr. Posts: 0	ExtIO installation Lunedì, 16 Febbraio 2009 07:51:30 I setup one ExtIO unit for Ethernet connection with EIA/TIA568A standard. Orange and green cables were swapped as menu instructed. Current cabling is 2-Green 1-W/G 3-W/O 4-Orange 7-W/BR 8-Brown 5-W/Blue 6-Blue Plug into PoE switch, both lights kept flikering on green. No red light appeared at all. No network connection. No button response. Does anybody have expereince about that? Thanks.
Gregor Cernivec Mr. Posts: 1	EXTIO Martedì, 17 Febbraio 2009 13:58:52 Connect the EXTIO with the camera over USB! D/L the software for extio and do as you would like to update the camera. It will update the EXTIO. Then it will work! Best, Gregor
KH081013 Mr. Posts: 0	EXTIO Mercoledì, 18 Febbraio 2009 05:47:30 Thanks Gregor. It's the first time to use ExtIO. What's software needs to download? ExtIO firmware?
Gregor Cernivec Mr. Posts: 1	EXTIO Giovedì, 26 Febbraio 2009 14:48:51 Yes, its 1.0.8 or something version in the download section. I am a bit late, hope you did it untill now.
Jay Moore Posts: 0	568A Venerdì, 03 Aprile 2009 18:44:52 TIA568A is also W/G Green W/O Blue W/Blue Orange W/Br Brown Hope this helps, too. Jay Jay Moore IT Manager Accu-Com Security T: 800 678 1411 E: jaymoore@accu-com.com AIM: jaymoore@accu-com.com Please feel free to call, email or IM me if you have any Mobotix-related questions!
Daniel Kranich Mr. Posts: 0	USB solution for your ExTio Venerdì, 24 Aprile 2009 19:50:04 I have a good paper we put together I can email you if you like on getting that crazy ExTio talking. TecPro here in Alaska has done quite a bit with them. Scott scott at tecpro dot com

Author

Message

KH081013
Mr.

Posts: 0

ExtIO installation

Lunedì, 16 Febbraio 2009 07:51:30

I setup one ExtIO unit for Ethernet connection with EIA/TIA568A standard.
Orange and green cables were swapped as menu instructed.
Current cabling is
2-Green
1-W/G
3-W/O
4-Orange
7-W/BR
8-Brown
5-W/Blue
6-Blue

Plug into PoE switch, both lights kept flikering on green. No red light appeared at all.
No network connection. No button response.

Does anybody have expereince about that?

Thanks.

Gregor Cernivec
Mr.

Posts: 1

EXTIO

Martedì, 17 Febbraio 2009 13:58:52

Connect the EXTIO with the camera over USB! D/L the software for extio and do as you would like to update the camera. It will update the EXTIO. Then it will work!

Best,

Gregor

KH081013
Mr.

Posts: 0

EXTIO

Mercoledì, 18 Febbraio 2009 05:47:30

Thanks Gregor.

It's the first time to use ExtIO.
What's software needs to download? ExtIO firmware?

Gregor Cernivec
Mr.

Posts: 1

EXTIO

Giovedì, 26 Febbraio 2009 14:48:51

Yes, its 1.0.8 or something version in the download section. I am a bit late, hope you did it untill now.

Jay Moore

Posts: 0

568A

Venerdì, 03 Aprile 2009 18:44:52

TIA568A is also

W/G
Green
W/O
Blue
W/Blue
Orange
W/Br
Brown

Hope this helps, too.

Jay

Jay Moore
IT Manager
Accu-Com Security

T: 800 678 1411
E: jaymoore@accu-com.com
AIM: jaymoore@accu-com.com

Please feel free to call, email or IM me if you have any Mobotix-related questions!

Daniel Kranich
Mr.

Posts: 0

USB solution for your ExTio

Venerdì, 24 Aprile 2009 19:50:04

I have a good paper we put together I can email you if you like on getting that crazy ExTio talking. TecPro here in Alaska has done quite a bit with them.
Scott
scott at tecpro dot com