MOBOTIX Driver 2025-08-01 for Milestone XProtect

The MOBOTIX driver for XProtect optimally integrates the MOBOTIX cameras into the Milestone XProtect. This driver is based on the ONVIF standard and has been extended by specific adaptations that are not included in the ONVIF standard. This enables optimal integration of the MOBOTIX cameras into the Milestone XProtect VMS for better utilisation of the MOBOTIX DNA.

Some improvements and bug fixes implemented.

Recommendation:

• For optimum results with MOBOTIX IoT cameras from the P6 and P7 series (e.g. M16, Q26, P71, M73, etc.)
• For optimum results with the MOBOTIX ONE series (e.g. M1A-S etc.) For optimum results with the MOBOTIX MOVE series Codec support: MJPEG, MxPeg and H.264 (H.265 only with P7 cameras) for MOBOTIX IoT cameras
• Optimal combination with the MOBOTIX HUB Discovery Plug-In to activate ONVIF mode and add the cameras to the MOBOTIX HUB for optimal results with MOBOTIX IoT cameras of the P6 and P7 series (e.g. M16, Q26, P71, M73, etc.)
• For optimum results with the MOBOTIX ONE series (e.g. M1A-S etc.) For optimum results with the MOBOTIX MOVE series Codec support: MJPEG, MxPeg and H.264 (H.265 only with P7 cameras) for MOBOTIX IoT cameras
• Optimum combination with the MOBOTIX HUB Discovery PlugIn for XProtect to activate ONVIF mode and add the cameras to the MOBOTIX HUB.

• For Milestone XProtect version 2022 R3 and earlier, please use the MOBOTIX Driver 2022R3 for XProtect
• For Milestone XProtect version 2023 R1 and newer, please use the MOBOTIX Driver 2023R1 for XProtect

For more information visit the MOBOTIX Community.