Home / Products / Home Automation / BellRFID

BellRFID
 T25 Hemispheric IP Video Door Station T25 System Manual Part 1 T25 System Manual Part 2 Quick Installation Guide: BellRFID  Configurator
BellRFID

BellRFID Module For The IP Video Door Station - with RFID Technology, One To Five Addressees

BellRFID is a modular bell button module that combines a base module with any one of six available bell button sets. The bell button set can be exchanged at any time.

The module can also be used to open the door without a key via RFID card thanks to the built-in RFID technology. You can use the blue function button at the door station to listen to new mailbox messages, record new announcements and activate/deactivate the mailbox. Visitors can leave a message even without the function button. The remaining mailbox features are easily controlled using the remote station of the door station (i.e., App).

The BellRFID module is installed in the exactly same manner as the KeypadRFID module.

A detailed description of the installation can be found in the Quick Installation Guide.

Bell Button F1

Bell Button F2

Bell Button F3

MX-Bell1-Button-F1
Big key with function buttons

MX-Bell1-Button-F2
2 medium-sized keys with function buttons

MX-Bell1-Button-F3
1 medium-sized, 2 small keys with function buttons

Bell Button F4

Bell Button 05

Bell Button XL1

MX-Bell1-Button-F4
4 small keys with function buttons

MX-Bell1-Button-05
5 small keys (w/o function buttons)

MX-Bell1-Button-XL1
XL key (w/o function buttons)

BellRFID Printing Service

MOBOTIX printing service for professionally printed bell button labels made of UV-resistant specialty paper

On its webiste MOBOTIX offers the printing service free of charge: Generate bell buttons online, send order and a couple of days later the printed labels will be delivered to your home free of charge. Additional advantage: Black ink in combination with the specialty paper is best UV resistant.

The Printing Service can be used for the BellRFID module as well as for the Info Module.


  BellRFID Basic Module  
 

Interface:

MxBus

 

Inputs:

2 galvanically separated inputs (AC/DC, self-powered, up to 50 V)

 

Outputs:

1 isolated relay output (AC/DC, up to 50 V/60 W/2 A)

 

Protection Class:

IP65 (DIN EN 60529)

 

Operating temperature:

-30 bis + 60 °C (DIN EN 50125)

 

Power Supply:

MxBus

 

Power consumption:

Typ. 1 W

 

RFID cards:
Type/encryption

MIFARE DESFire EV1 3K3DES/AES

 

Firmware:

Version 4.1.9 and higher

 

 

 

 

 

Article No.:

MX-Bell1-Core-EXT-PW
MX-Bell1-Core-EXT-SV
MX-Bell1-Core-EXT-DG
MX-Bell1-Core-EXT-BL

 

 

Configurator